Skip Headers

Oracle® Database Net Services Administrator's Guide
10g Release 1 (10.1)

Part Number B10775-01
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Feedback

Go to previous page
Previous
Go to next page
Next
View PDF

16 Troubleshooting Oracle Net Services

Oracle Net Services provides methods for understanding and resolving network problems through the use of log and trace files. These files keep track of the interaction between network components as errors occur. Evaluating this information will help you to diagnose and troubleshoot even the most complex network problems.

This chapter describes common network errors and outlines procedures for resolving them. It also describes methods for logging and tracing error information to diagnose and troubleshoot more complex network problems. This chapter contains these topics:

Diagnosing Net8 Services

If an attempt to make a basic peer-to-peer (single protocol network) connection returns an ORA Error, this section may help you diagnose the cause of the problem.

Any underlying fault, noticeable or not, is reported by Net8 Services with an error number or message that is not always indicative of the actual problem. This section helps you determine which parts of Net8 Services do function properly rather than the parts that do not work. It also helps you to decide in which of the following categories the fault belongs:

Testing the various network layers progressively should in most cases uncover any problem.

Server Diagnostics


Note:

You may need assistance from your server administrator to follow the instructions in this section.

Answer the following questions:

  • Is any other system (workstation/server) able to connect to the server using Net8?

  • Has the server, database, or listener configuration remained the same for some time?

If you answered YES to any of the preceding questions/statements, then skip this section and continue to "Client Diagnostics".

If you are unsure, or answered NO to any of the preceding questions, then continue.

Diagnosing Net8 Services on the server involves the following tasks:

Task 1: Verify the Database Is Running

To check that the database is up, login to the database and connect with a valid username and password. For example:

SQLPLUS system/manager 

A message appears, confirming that you are connected with the database. If you receive the following errors, ask your Database Administrator to assist you:

  • ORA-1017: invalid U/P

  • ORA-1034: Oracle not available

Task 2: Perform a Loopback Test

To perform a loopback test from the server to the database:

  1. Ensure that the listener.ora, tnsnames.ora, and sqlnet.ora files exist in the correct locations, as described in "Localized Configuration File Support".

  2. Follow the instructions in "Testing Configuration on the Database Server" to perform a loopback test.

    • If the loopback test continues to fail, continue to the next step.

    • If the loopback test passes, skip to "Client Diagnostics".

  3. Check the Problem/Solution Database Web site at http://support.oracle.com for more specific information on the error received, or contact Oracle Worldwide Support.

Client Diagnostics

At this point, you know the serverside listener works properly, because you could verify at least one of the following statements:

  • The database server passed a loopback test, showing that the connection worked.

  • Other computers connect also using Net8 Services to this same database.

  • Connections from this workstation worked previous to making changes on this computer, such as the installation of a new product or a modification to the network configuration.

To perform diagnostics on the client:

  1. Check that you have installed the same protocol support as was installed on the database server.

    On UNIX you can use the ADAPTERS utility to verify protocol support. On the database server, run the adapters 'which oracle' command from $ORACLE_HOME/bin to display the protocol support, naming methods, and security options linked with the oracle executable. The adapters utility displays output similar to the following:

    Oracle Net transport protocols linked with ./oracle are:
    
        IPC
        BEQ
        TCP/IP
        SSL
        RAW
    
    Oracle Net naming methods linked with ./oracle are:
    
        Local Naming (tnsnames.ora)
        Oracle Directory Naming
        Oracle Host Naming
        NIS Naming
    
    Oracle Advanced Security options linked with ./oracle are:
    
        RC4 40-bit encryption
        RC4 56-bit encryption
        RC4 128-bit encryption
        RC4 256-bit encryption
        DES40 40-bit encryption
        DES 56-bit encryption
        3DES 112-bit encryption
        3DES 168-bit encryption
        AES 128-bit encryption
        AES 192-bit encryption
        AES 256-bit encryption
        MD5 crypto-checksumming
        SHA crypto-checksumming (for FIPS)
        SHA-1 crypto-checksumming
        Kerberos v5 authentication
        CyberSAFE authentication
        RADIUS authentication
        ENTRUST authentication
    
    

    On the client, run the adapters command from $ORACLE_HOME/bin to display the configured Oracle protocol support, naming methods, and security options. The ADAPTERS utility displays output similar to the following:

    Installed Oracle Net transport protocols are:
    
        IPC
        BEQ
        TCP/IP
        SSL
        RAW
    
    Installed Oracle Net naming methods are:
    
        Local Naming (tnsnames.ora)
        Oracle Directory Naming
        Oracle Host Naming
        NIS Naming
    
    Installed Oracle Advanced Security options are:
    
        RC4 40-bit encryption
        RC4 56-bit encryption
        RC4 128-bit encryption
        RC4 256-bit encryption
        DES40 40-bit encryption
        DES 56-bit encryption
        3DES 112-bit encryption
        3DES 168-bit encryption
        AES 128-bit encryption
        AES 192-bit encryption
        AES 256-bit encryption
        MD5 crypto-checksumming
        SHA-1 crypto-checksumming
        Kerberos v5 authentication
        RADIUS authentication
        ENTRUST authentication
    

    Note:

    RAW is an internal protocol used by Oracle Net.


    See Also:

    Oracle UNIX operating system-specific Administrator's Reference for further information about the adapters utility

  2. Check base connectivity for underlying network transport. Net8 technology depends on the underlying network for a successful connection.

    Protocol Verify that you can...
    TCP/IP Use terminal emulation or file transfer utilities, (PING, FTP, TELNET) from the client to the database server.
    Named Pipes
    • See other computers or servers on the Microsoft network.
    • Ensure that you are able to share drives within the network.


  3. To ensure that both the Net8 foundation layer and the appropriate Oracle protocol support are present, verify that all Net8 Services software for the client has been installed.

  4. Ensure that the client computer has the tnsnames.ora and the sqlnet.ora files exist in the correct locations.

    If you have any other working client computers connecting to the selected Oracle database, back up your existing files and copy both the working tnsnames.ora and sqlnet.ora files from the working computer onto the non-working client workstations. This eliminates the possibility of errors in the files.

  5. Test the Net8 foundation layer.


    Note:

    Do not use the TNSPING utility. The TNSPING utility works like the TCP/IP PING utility and does not create and open a socket, nor does it connect with the listener. It ensures that the listener is present on the database server.

  6. If the connection still fails:

Resolving the Most Common Error Messages for Oracle Net Services

Due to the complexity of network communications, network errors may originate from a variety of sources, for a variety of reasons. If an error occurs, applications such as SQL*Plus, that depend on network services from Oracle Net Services, will normally generate an error message.

A list of the most common network error messages follows:


See Also:

Oracle Database Error Messages for a complete listing of error messages

ORA-03113: TNS:end-of-file on communication channel
Cause: An error has occurred on the database server.
Action: Check the alert_sid.log on the server. The location of alert_sid.log is specified by the BACKGROUND_DUMP_DEST initialization parameter. An unexpected end of file was processed on the communication channel. This may be an indication that the communications link may have gone down at least temporarily; it may indicate that the server has gone down.You may need to modify your retransmission count.
ORA-03121: no interface driver connection - function not performed
Cause: A SQL*Net version 1 prefix was erroneously used in the connect string.
Action: Do not use the following prefixes in the connect string.
  • T:

  • X:

  • P:

The username and password were specified from a client computer that had no local Oracle database installed.Specify a connect string.

ORA-12154: TNS:could not resolve service name
Cause: Oracle Net could not locate the net service name specified in the tnsnames.ora configuration file.
Action: Perform these steps:
  1. Verify that a tnsnames.ora file exists.


    See Also:

    "Localized Configuration File Support" for configuration file location information

  2. Verify that there are not multiple copies of the tnsnames.ora file.

  3. In the tnsnames.ora file, verify that the net service name specified in your connect string is mapped to a connect descriptor.

  4. Verify that there are no duplicate copies of the sqlnet.ora file.

  5. If you are using domain names, verify that your sqlnet.ora file contains a NAMES.DEFAULT_DOMAIN parameter. If this parameter does not exist, you must specify the domain name in your connect string.

  6. If you are not using domain names, and this parameter exists, delete it or disable it by commenting it out.

  7. If you are connecting from a login dialog box, verify that you are not placing an "@" symbol before your connect net service name.

  8. Activate client tracing and repeat the operation.

Cause: Oracle Net could not locate the database service name or net service name specified in the directory server.
Action: Perform these steps:
  1. Verify that the database service or net service name entry exists in the directory that this computer was configured to use.


    See Also:

    Oracle Internet Directory Administrator's Guide for directory setup instructions

  2. Verify that the sqlnet.ora file includes the following entry:

    NAMES.DIRECTORY_PATH=(ldap, other_naming_methods)
    
ORA-12170: TNS:Connect timeout occurred
Cause: The client failed to establish a connection and complete authentication in the time specified by the SQLNET.INBOUND_CONNECT_TIMEOUT parameter in the sqlnet.ora file. This error may be a result of network or system delays, or it may indicate that a malicious client is trying to cause a denial-of-service attack on the database server.

See Also:

"Configuring the Listener and the Oracle Database To Limit Resource Consumption By Unauthorized Users" further information about setting the SQLNET.INBOUND_CONNECT_TIMEOUT parameter

Action: If the error occurred due to system or network delays that are normal for the particular environment, then perform these steps:
  1. Turn on tracing to determine where clients are timing out.

  2. Reconfigure the SQLNET.INBOUND_CONNECT_TIMEOUT parameter in sqlnet.ora to a larger value.

If you suspect a malicious client, then perform these steps:

  1. Locate the IP address of the client in the sqlnet.log file on the database server to identify the source.

    For example, the following sqlnet.log excerpt shows a client IP address of 10.10.150.35.

    Fatal NI connect error 12170.
    
      VERSION INFORMATION:
            TNS for Solaris: Version 10.1.0.2.0
            Oracle Bequeath NT Protocol Adapter for Solaris: Version 10.1.0.2.0
            TCP/IP NT Protocol Adapter for Solaris: Version 10.1.0.2.0
      Time: 03-JUL-2002 13:51:12
      Tracing to file: /ora/trace/svr_13279.trc
      Tns error struct:
        nr err code: 0
        ns main err code: 12637
        TNS-12637: Packet receive failed
        ns secondary err code: 12604
        nt main err code: 0
        nt secondary err code: 0
        nt OS err code: 0
      Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.10.150.35)(PORT=52996))
    
    

    Beware that an IP address can be forged.

    If the time out occurs before the IP address can be retrieved by the database server, then enable listener tracing to determine the client that made the request.

  2. Restrict access to the client. For example, you can configure parameters for access rights in the sqlnet.ora file.

TNS-12500/ORA-12500: TNS: listener failed to start a dedicated server process
Cause: The listener failed to start the oracle program. Possible reasons include:
  • The maximum number of processes allowed for a single user was exceeded

  • The listener does not have execute permission on the oracle program

  • The associated Windows service is not started

In some cases, these errors can be caused by the same conditions which cause TNS-12549/ORA-12549, TNS-00519, TNS-12540/ORA-12540, TNS-00510, and TNS-12560/ORA-12560 errors.

Action: Perform the appropriate action:
  • Increase the number of processes by setting the PROCESSES parameter in the database initialization file to a larger value.

  • Check the listener.log file for detailed error stack information.

ORA-12514: TNS:listener does not currently know of service requested in connectdescriptor
Cause: The listener received a request to establish a connection to a database or other service. The connect descriptor received by the listener specified a service name for a service (usually a database service) that has either not yet dynamically registered with the listener or has not been statically configured for the listener. This may be a temporary condition such as after the listener has started, but before the database instance has registered with the listener.
Action: Perform these steps:
  1. Wait a moment and try to connect a second time.

  2. Check which services are currently known by the listener by executing the Listener Control utility STATUS or SERVICES command.

  3. Check that the SERVICE_NAME parameter in the connect descriptor specifies a service name known by the listener.

  4. Check for an event in the listener.log file.

ORA-12520: TNS:listener could not find available handler for requested type of server
Cause: The type of service handler requested by the client is incorrect or not registered for the requested SERVICE_NAME/INSTANCE_NAME, or the database instance is not registered with the listener.
Action: If you suspect the problem is the wrong type of service handler, perform these steps:
  1. If (server=value) is set is in the connect descriptor, ensure that the value is set to the appropriate service handler type for the database, that is, dedicated for dedicated server or shared for dispatchers. You can use the Listener Control utility SERVICES command to see what service handlers are currently registered with the listener.

  2. If USE_DEDICATED_SERVER is set to ON in the sqlnet.ora file, then ensure the database is configured to use dedicated servers. If it is not, set this parameter to off.

  3. Ensure that the database instance is running. If the instance not running, start it so that it can register with the listener.

ORA-12521: TNS:listener could not resolve INSTANCE_NAME given in connect descriptor
Cause: The INSTANCE_NAME in the connect descriptor is incorrect, or the database instance is not registered with the listener.
Action: Perform these steps:
  1. Check to make sure the service name specified in the connect descriptor is correct.

  2. Ensure the database instance is running. If the instance not running, start it so that it can register with the listener. You can use the Listener Control utility SERVICES command to see what instances are currently registered with the listener.

ORA-12525: TNS:listener has not received client's request in time allowed
Cause: The client failed to complete its connect request in the time specified by the INBOUND_CONNECT_TIMEOUT_listener_name parameter in the listener.ora file. This error may be a result of network or system delays, or it may indicate that a malicious client is trying to cause a denial-of-service attack on the listener.

See Also:

"Configuring the Listener and the Oracle Database To Limit Resource Consumption By Unauthorized Users" for further information about setting the INBOUND_CONNECT_TIMEOUT_listener_name parameter

Action: If the error occurred due to system or network delays that are normal for the particular environment, then reconfigure the INBOUND_CONNECT_TIMEOUT_listener_name parameter in listener.ora to a larger value.

If you suspect a malicious client, then perform these steps:

  1. Locate the IP address of the client in listener.log to identify the source.

    For example, the following listener.log excerpt shows a client IP address of 10.10.150.35.

    03-JUL-2002 16:42:35 * <unknown connect data> *
    (ADDRESS=(PROTOCOL=tcp)(HOST=10.10.150.35)(PORT=53208)) * establish *
    <unknown sid> * 12525
    TNS-12525: TNS:listener has not received client's request in time allowed
    TNS-12604: TNS: Application timeout occurred
    
    

    Beware that an IP address can be forged.

  2. Restrict access to the client. For example, you can configure parameters for access rights in the sqlnet.ora file.

ORA-12533: TNS:illegal ADDRESS parameters
Cause: The protocol specific parameters in the ADDRESS section of the designated connect descriptor are incorrect.
Action: Correct the protocol address.

See Also:

Oracle Net Services Reference Guide for correct protocol syntax

TNS-12540/ORA-12540: TNS:internal limit restriction exceeded and TNS-00510: Internal limit restriction exceeded
Cause: An internal limit has been exceeded. Possible limits include:
  • Number of open connection that Oracle Net can process simultaneously

  • Number of memory buffers which can be used simultaneously

  • Number of processes a particular database instance is allowed

The first two are examples of hard limits. The third is an example of a limit which can be increased by setting PROCESSES parameter in the database initialization file to a larger value. In this case, a TNS-12500/ORA-12500 error is also returned. In some cases, these errors can be caused by the same conditions which cause TNS-12549/ORA-12549 and TNS-00519 errors.

Action: Perform these steps:

Wait for the open connections to close and retry. If the error persists, then check the sqlnet.log or listener.log file for detailed error stack information.

TNS-12541/ORA-12541: TNS:no listener
Cause: The connection request could not be completed because the listener is not running.
Action: Perform these steps:

Ensure that the supplied destination address matches one of the addresses used by the listener.Verify that this is not a version compatibility problem.

TNS-12549/ORA-12549: TNS:operating system resource quota exceeded and TNS-00519: Operating system resource quota exceeded
Cause: A quota or hard limit imposed by the operating system has been exceeded.

Possible limits include:

  • The maximum number of processes allowed for a single user

  • The operating system is running low on paging space

Action: Perform the appropriate action:
  • Increase the number of processes by setting the PROCESSES parameter in the database initialization file to a larger value.

  • Check the sqlnet.log or listener.log file for detailed error stack information, such as an operating system error code to help identify which quota has been exceeded.

TNS-12560/ORA-12560: TNS:protocol adapter error occurred
Cause: There was an error when using a particular protocol. This error may be due to incorrect configuration of an ADDRESS parameter or may occur due to errors returned from the underlying protocol or operating system interface.

In some cases, these errors will be caused by the same conditions which cause TNS-00510, TNS-00519, TNS-12540/ORA-12540, TNS-12549/ORA-12549 errors.

Action: Check the sqlnet.log or listener.log file for detailed error stack information.

Troubleshooting Directory Naming Errors

Directory naming issues associated with connectivity errors such as ORA-12154, ORA-12543, or ORA-12541 for database service or net service name entries in a directory server require analysis of the data. You can analyze the data contained within a directory server with the ldifwrite command line tool.

ldifwrite enables you to convert all or part of the information residing in a directory server to LDAP Data Interchange Format (LDIF). The ldifwrite tool performs a subtree search, including all entries following the specified distinguished name (DN), including the DN itself.

The ldifwrite tool syntax is as follows:

ldifwrite -c net_service_name/database_service -b base_DN -f ldif_file 

Table 16-1 ldapwrite Arguments

Argument Description
-c net_service_name/database_service Specify the net service name or database service name that will connect you to the directory server.
-b base_DN Specify the base of the subtree to be written out in LDIF format.
-f ldif_file Specify the input file name.

The following example writes all the directory naming entries under dc=us,dc=acme,dc=com to the output1.ldi file:

ldifwrite -c ldap -b "dc=us,dc=acme,dc=com" -f output.ldif

Troubleshooting Tips from the Field for Oracle Net Services

Here are some tips you may find helpful when you are having difficulty diagnosing network problems:

Questions to Ask When Troubleshooting Oracle Net Services

Here are some questions to ask yourself when diagnosing a problem:

  • Do all computers have a problem, or is it just one?

    If one computer works and another does not, and you are confident that the same software (Oracle and third-party products) is installed, on each computer, swap out the network cables, if they are close enough, to see if the problem moves. If it does move, it indicates that the problem has something to do with the client/server connection and is not local to the PC.

  • What kind of links exist between the client and the server, for example, X.25, ISDN, Token Ring, or leased line?

    Sniffers and LAN analyzers are useful for intermittent failing connections or detecting time outs and resent packets. You can also see what side of the conversation is waiting for a response.

Troubleshooting Network Problems Using Log and Trace Files

Oracle Net Services provide detailed information about the source and context of problems as they arise. This information is generated and stored in log and trace files. The process of logging and tracing error information will help you to diagnose and resolve network problems.

Logging Error Information for Oracle Net Services

All errors encountered in Oracle Net Services are appended to a log file for evaluation by a network or database administrator. The log file provides additional information for an administrator when the error message on the screen is inadequate to understand the failure. The log file, by way of the error stack, shows the state of the software at various layers.

To ensure that all errors are recorded, logging cannot be disabled on clients or Names Servers. Furthermore, only an administrator may replace or erase log files. The log file for the listener also includes Audit Trail information about every client connection request, as well as most listener control commands.

This section contains these topics:

Oracle Net Error Stacks

Log files provide information contained in an error stack. An error stack refers to the information that is produced by each layer in an Oracle communications stack as the result of a network error.

The error stack components are described in Table 16-2.

Table 16-2 Error Stack Components

Error Stack Component Description
NI Network Interface. This layer provides a generic interface for Oracle clients, servers, or external processes to access Oracle Net functions. The NI layer handles the "break" and "reset" requests for a connection.

NI uses the Network Routing (NR) layer to obtain network route information for pre-Oracle9i clients, and the Network Naming (NN) layer to resolve names to connect descriptors. For Oracle9i clients, NI goes directly to the Network Session (NS) layer.

NS Network Session (main and secondary layers). These layers receive requests from NI, and settle all generic computer-level connectivity issues, such as: the location of the server or destination (open, close functions); whether one or more protocols will be involved in the connection (open, close functions); and how to handle interrupts between client and server based on the capabilities of each (send, receive functions).
NA Network Authentication. This layer negotiates authentication and encryption requirements.
NT Network Transport (main, secondary, and operating system layers). This layer maps Oracle Net foundation layer functionality to industry-standard protocols.

Example: Error Stack

As an example, suppose that a user of a client application tries to establish a connection with a database server using Oracle Net and TCP/IP, and the user enters:

sqlplus scott/tiger@hrserver.com 

The following error displays:

ORA-12543: TNS:Unable to connect to destination

This message indicates that the connection to the server failed because the database could not be contacted. Although the application displays only a one-line error message, an error stack that is much more informative is recorded in the log file by the network layer.

On the client side, the sqlnet.log file (Example 16-1) contains an error stack corresponding to the ORA-12543 error.

Example 16-1 sqlnet.log File

***********************************************************

Fatal OSN connect error 12543, connecting to:
 (DESCRIPTION=(CONNECT_DATA=(SID=trace)(CID=(PROGRAM=)
   (HOST=lala)(USER=sviavant)))(ADDRESS_LIST=(ADDRESS=
   (PROTOCOL=ipc)(KEY=trace))(ADDRESS=(PROTOCOL=tcp)
   (HOST=lala)(PORT=1521))))

VERSION INFORMATION:
TNS for SunOS:
Oracle Bequeath NT Protocol Adapter for SunOS:
Unix Domain Socket IPC NT Protocol Adaptor for SunOS: 
TCP/IP NT Protocol Adapter for SunOS:
  Tracing to file: /home/sviavant/trace_admin.trc
  Tns error struct:
    TNS-12543: TNS:unable to connect to destination
    ns main err code: 12541
    TNS-12541: TNS:no listener
    ns secondary err code: 12560
    nt main err code: 511
    TNS-00511: No listener
    nt secondary err code: 61
    nt OS err code: 0

Oracle Net Services Log File Names

Each Oracle Net Services component produces its own log file. Table 16-3 provides the default log file names and lists the components that generate the log files.

Table 16-3 Log Files

Log File Component
listener.log Listener
sqlnet.log Client or Database Server
instance-name_pid.log Oracle Connection Manager listener
instance-name_cmgw_pid.log Oracle Connection Manager CMGW (Connection Manager gateway) process
instance-name_cmadmin_pid.log Oracle Connection Manager CMADMIN (Connection Manager Administration) process
instance-name_alert.log Oracle Connection Manager alert log

Setting Logging Parameters

Parameters that control logging, including the type and amount of information logged, as well as the location where the files are stored, are set in the configuration file of each network component as described in Table 16-4.

Table 16-4 Location of Log Parameters

Network Component Configuration File
Oracle Connection Manager Processes cman.ora
Listener listener.ora
Client sqlnet.ora
Database Server sqlnet.ora

This section contains these topics:

sqlnet.ora Log Parameters

Table 16-5 describes the log parameters settings that can be set in the sqlnet.ora file.

Table 16-5 sqlnet.ora Log Parameters

sqlnet.ora Parameter Oracle Net Manager Field Description
LOG_DIRECTORY_CLIENT Client Information: Log Directory Establishes the destination directory for the client log file. By default, the client directory is the current working directory.
LOG_FILE_CLIENT Client Information: Log File Sets the name of the log file for the client. By default the log name is sqlnet.log.
LOG_DIRECTORY_SERVER Server Information: Log Directory Establishes the destination directory for the database server log files. By default the server directory is $ORACLE_HOME/network/log on UNIX and ORACLE_HOME\network\log on Windows.
LOG_FILE_SERVER Not applicable Sets the name of the log file for the database server. By default the log name is sqlnet.log.

listener.ora Log Parameters

Table 16-6 describes the log parameters settings that can be set in the listener.ora file.

Table 16-6 listener.ora Log Parameters

listener.ora Parameter Oracle Enterprise Manager/Oracle Net Manager Field Description
LOG_DIRECTORY_listener_name and LOG_FILE_listener_name Log File Establishes the destination directory and file for the log file that is automatically generated for listener events. By default the directory is $ORACLE_HOME/network/log on UNIX and ORACLE_HOME\network\log on Windows, and the file name is defaulted to listener.log.

cman.ora Log Parameters

Table 16-7 describes the log parameters settings that can be set in the cman.ora file.

Table 16-7 cman.ora Log Parameters

cman.ora Parameter Description
EVENT_GROUP Specifies which event groups are logged. Multiple events may be designated using a comma-separated list. This parameter accepts the following values:
  • INIT_AND_TERM—initialization and termination

  • MEMORY_OPS—memory operations

  • CONN_HDLG—connection handling

  • PROC_MGMT—process management

  • REG_AND_LOAD—registration and load update

  • WAKE_UP—events related to CMADMIN wakeup queue

  • TIMER—gateway time outs

  • CMD_PROC—command processing

  • RELAY—events associated with connection control blocks

LOG_DIRECTORY Establishes the destination directory for log files.

By default, the directory is $ORACLE_HOME/network/log on UNIX and ORACLE_HOME\network\log on Windows.

LOG_LEVEL Establishes the level of logging. Four levels are supported:
  • off (default)—no logging

  • user—user log information

  • admin—administrative log information

  • support—Oracle Support Services information

The Oracle Connection Manager listener, gateway, and CMADMIN processes create log files on both UNIX and Windows.


Setting Logging Parameters in Configuration Files

You configure logging parameters for the sqlnet.ora file with Oracle Net Manager and listener.ora file with either Oracle Enterprise Manager or Oracle Net Manager.

You must manually configure cman.ora file logging parameters.


See Also:

Oracle Net Services Reference Guide

To set logging parameters with Oracle Enterprise Manager and Oracle Net Manager:

Log File Tool Set logging parameters here...
sqlnet.log Oracle Net Manager
  1. Start Oracle Net Manager.

See Also: "Oracle Net Manager"

  1. In the navigator pane, expand Local > Profile.

  2. From the list in the right pane, select General.

  3. Click the Logging tab.

  4. Specify the settings.

  5. Choose File > Save Network Configuration.

listener.log Oracle Enterprise Manager
  1. Access the Oracle Net Administration page in Oracle Enterprise Manager.

See Also: "Oracle Enterprise Manager"

  1. Select Listeners from the Administer list, and then select the Oracle home that contains the location of the configuration files.

  2. Click Go.

The Listeners page appears.

  1. Select a listener, and then click Edit.

The Edit Listeners page appears.

  1. Click the Logging & Tracing tab.

  2. Specify the settings.

  3. Click OK.

listener.log Oracle Net Manager
  1. Start Oracle Net Manager.

See Also: "Oracle Net Manager"

  1. In the navigator pane, expand Local > Listeners.

  2. Select a listener.

  3. From the list in the right pane, select General.

  4. Click the Logging and Tracing tab.

  5. Specify the settings.

  6. Choose File > Save Network Configuration.


Setting Logging Settings During Runtime of Control Utilities

You can set logging during control utility runtime. Setting logging with a control utility does not set parameters in the *.ORA files; the setting is only valid for the session of the control utility:

  • For a listener, use the SET LOG_FILE and SET LOG_DIRECTORY commands from the Listener Control utility.

  • For an Oracle Connection Manager, use the SET LOG_DIRECTORY, SET LOG_LEVEL, and SET EVENT commands from the Oracle Connection Manager control utility.


    See Also:

    Oracle Net Services Reference Guide

Using Log Files

To use a log file to diagnose a network error:

  1. Review the log file for the most recent error number you received from the application. Note that this is almost always the last entry in the log file.

  2. Starting from the bottom of the file, locate the first nonzero entry in the error report. This is usually the actual cause.

  3. If that error does not provide the desired information, review the next error in the stack until you locate the correct error information.

  4. If the cause of the error is still not clear, turn on tracing and repeat the statement that produced the error message.

Analyzing Listener Log Files

This section describes what is recorded in the listener log file, including:

Listener Log Audit Trail Information

The listener log file contains audit trail information that enables you to gather and analyze network usage statistics, as well as information indicating the following:

  • A client connection request

  • A RELOAD, START, STOP, STATUS, or SERVICES command issued by the Listener Control utility

You can use Audit Trail information to view trends and user activity by first storing it in a table and then collating it into a report format. To import the data into a table, use an import utility such as SQL*Loader.

Format of the Listener Log Audit Trail

The audit trail formats text into the following fields:

Timestamp * Connect Data [* Protocol Info] * Event [* SID | Service] * Return Code

Properties of the audit trail are as follows:

  • Each field is delimited by an asterisk (*).

  • Protocol address information and service name or SID information appear only when a connection is attempted.

  • A successful connection or command returns a code of zero.

  • A failure produces a code that maps to an error message.


    See Also:


Example: Listener Log Event for Successful Reload Request

The following output shows a log file excerpt with RELOAD command request.

14-JUL-2002 00:29:54 *
(connect_data=(cid=(program=)(host=sales-server)(user=jdoe))(command=stop)
(arguments=64)(service=listener)(version=135290880))
* stop * 0
Example: Listener Log Events for a Successful Connection Request

The following output shows a log file excerpt with a successful connection request.

14-JUL-2002 15:28:58 * 
(connect_data=(service_name=sales.us.acme.com)(cid=(program=)(host=sales-server)
(user=jdoe))) 
* (address=(protocol=tcp)(host=10.10.150.35)(port=41349)) * establish 
* sales.us.acme.com * 0 
Example: Listener Log Events for an Unsuccessful Connection Request

The following output shows a log file excerpt with a successful execution of the STATUS command by host sales-server, followed by an unsuccessful connection attempt by a client with an IP address of 10.10.150.35. This connection attempt resulted in an ORA-12525: TNS:listener has not received client's request in time allowed error message, which occurs when a client fails to complete its connect request in the time specified by the INBOUND_CONNECT_TIMEOUT_listener_name parameter in the listener.ora file. This client may be attempting a denial-of-service attack on the listener.

03-JUL-2002 16:41:57 * 
(CONNECT_DATA=(CID=(PROGRAM=)(HOST=sales-server)(USER=jdoe))(COMMAND=status)
(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=153092352)) * status * 0
03-JUL-2002 16:42:35 * <unknown connect data> * (ADDRESS=(PROTOCOL=tcp)(HOST=10.10.150.35)(PORT=53208)) * establish * 
<unknown sid> * 12525
TNS-12525: TNS:listener has not received client's request in time allowed
TNS-12604: TNS: Application timeout occurred

Listener Service Registration Event Information

The listener records service registration events. During service registration, the PMON process provides the listener with information about the following:

  • Service names for each running instance of the database

  • Instance names of the database

  • Service handlers (dispatchers or dedicated servers) available

  • Dispatcher, instance, and node load information

  • Dynamic listening endpoints

The service registration-related events listed in Table 16-8 are recorded in the listener.log file:

Table 16-8 Service Registration Event Log Information

Event Description
service_register The listener received registration information for an instance.
service_update The listener received updated registration information for a particular instance, such as dispatcher or instance load information.
service_died The listener lost its connection to PMON. All registration information for the instance is discarded. Clients will be unable to connect to the instance until PMON registers it again.

Format of the Listener Service Registration Information

The service registration events are formatted into the following fields:

Timestamp * Event *  Instance Name * Return Code

Properties of service registration fields are as follows:

Example: Listener Log with Service Registration Events

The following example shows a log file with service registration events. Notice how the listener is able to receive a client request after a successful service_register event, but is unable to receive client requests after a service_died event.

------------------------------- 
14-JUL-2002 15:28:43 * service_register * sales * 0 
14-JUL-2002 15:28:43 * service_register * sales * 0 
14-JUL-2002 15:28:58 * 
(connect_data=(service_name=sales.us.acme.com)(cid=(program=)(host=sales-server)
(user=jdoe))) 
* (address=(protocol=tcp)(host=10.10.150.35)(port=41349)) * establish 
* sales.us.acme.com * 0 
14-JUL-2002 15:38:44 * service_update * sales * 0 
14-JUL-2002 15:38:44 * service_update * sales * 0 
14-JUL-2002 15:48:45 * service_update * sales * 0 
14-JUL-2002 15:48:45 * service_update * sales * 0 
14-JUL-2002 15:50:57 * 
(connect_data=(service_name=sales.us.acme.com)(cid=(program=)(host=sales-server)(u
ser=jdoe))) 
* (address=(protocol=tcp)(host=10.10.150.35)(port=41365)) * establish 
* sales.us.acme.com * 0 
14-JUL-2002 15:51:26 * service_died * sales * 12537 
14-JUL-2002 15:51:26 * service_died * sales * 12537 
14-JUL-2002 15:52:06 * 
(connect_data=(service_name=sales.us.acme.com)(cid=(program=)(host=sales-server)(u
ser=jdoe))) 
* (address=(protocol=tcp)(host=10.10.150.35)(port=41406)) * establish 
* sales.us.acme.com * 12514 
TNS-12514: TNS:listener could not resolve SERVICE_NAME given in connect 
descriptor  
--------------------------------

Listener Direct Hand-Off Information

The listener records direct hand-off events to dispatchers. These events are formatted into the following fields:

Timestamp * Presentation * Handoff  * Error Code

Properties of direct hand-off fields are as follows:

Example: Listener Log Event for Direct Hand-Off

A direct hand-off event in the log file is shown in the following example.

21-JUL-2002 10:54:55 * oracle.aurora.net.SALESHttp2 * handoff * 0

Analyzing Oracle Connection Manager Logs

Oracle Connection Manager generates four types of log files: one each for its listener, gateway, and CMADMIN processes and one for alerts. The last is a chronological record of all critical errors. In addition to logging critical errors, the alert log captures information about instance startup and shutdown. It also records the value of all configuration parameters at the beginning and end of a session. See Table 16-3 for file name syntax.

The CMADMIN and gateway log files are reproduced here. Table 16-9 explains some of the log entries. Each entry consists of a timestamp and an event. You can configure cman.ora to log events in the following categories:

  • Initialization and termination

  • Memory operations

  • Connection handling

  • Process management

  • Registration and load update

  • Events related to CMADMIN wakeup queue

  • Gateway timeouts

  • Command processing

  • Events associated with connection control blocks

Use the SET EVENT command to specify which events to log.

CMADMIN Log File Example

-------------------------------
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:46:40)(EVENT=Parameter list)
    (listener_address=(address=(protocol=tcp)(host=usunnae16)(port=1574)))
    (aso_authentication_filter=OFF)
    (connection_statistics=ON)
    (log_directory=/home/user/network/admin/log)
    (log_level=support)
    (max_connections=256)
    (idle_timeout=5)
    (inbound_connect_timeout=0)
    (session_timeout=20)
    (outbound_connect_timeout=0)
    (max_gateway_processes=1)
    (min_gateway_processes=1)
    (password=OFF)
    (remote_admin=ON)
    (trace_directory=/home/user/network/admin/log)
    (trace_level=off)
    (trace_timestamp=OFF)
    (trace_filelen=0)
    (trace_fileno=0)
)
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:46:40)(EVENT=Shared Memory Size)
(BYTES=82524))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:46:40)(EVENT=GMON Attributes validated)
(Type=Information))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:46:40)(EVENT=NS Listen Successful)
((ADDRESS=(PROTOCOL=tcp)(HOST=usunnae16)(PORT=55878))))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:46:44)(EVENT=Received command)(CMD=verify
password))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:46:44)(EVENT=Received command)
(CMD=version))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:46:44)(EVENT=Received command)
(CMD=show status))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:46:44)(EVENT=Failed to get procedure id))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:49:12)(EVENT=Received command)(CMD=verify
password))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:49:15)(EVENT=Failed to get procedure id))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:49:29)(EVENT=Received command)(CMD=verify
password))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:49:46)(EVENT=Failed to get procedure id))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:49:50)(EVENT=Received command)(CMD=verify
password))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:49:50)(EVENT=Received command)
(CMD=probe monitor))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:49:50)(EVENT=Received command)
(CMD=shutdown normal))
-------------------------------

Gateway Log File Example

-------------------------------
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:46:41)(EVENT=NS Initialised))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:46:41)(EVENT=Memory Allocated)
(BYTES=1024))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:46:41)(EVENT=NCR Initialised))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:46:41)(EVENT=Connected to Monitor))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:46:41)(EVENT=State Change from Empty to 
Init))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:46:41)(EVENT=Memory Allocated)
(BYTES=251904))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:46:41)(EVENT=Memory Allocated)
(BYTES=2048))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:46:41)(EVENT=CCB Initialised))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:46:41)(EVENT=Started Listening))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:46:41)(EVENT=State Change from Init to 
Ready))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:46:47)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:48:06)(EVENT=Ready)(CONN NO=0))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:48:06)(EVENT=Ready)(CONN NO=0))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:48:07)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:48:12)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:48:13)(EVENT=Idle Timeout)(CONN NO=0))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:48:17)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:48:22)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:48:25)(EVENT=Ready)(CONN NO=0))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:48:25)(EVENT=Ready)(CONN NO=0))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:48:27)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:48:30)(EVENT=Idle Timeout)(CONN NO=0))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:48:32)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:48:37)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:48:42)(EVENT=Ready)(CONN NO=0))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:48:42)(EVENT=Ready)(CONN NO=0))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:48:42)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:48:47)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:48:52)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:48:57)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:49:02)(EVENT=Session Timeout)(CONN NO=0))
(LOG_RECORD=(TIMESTAMP=08-MAY-2003 08:49:02)(EVENT=Housekeeping))
-------------------------------

Table 16-9 CMADMIN and Gateway Log Entries: What They Mean

Event Description Log File
GMON Attributes validated Informational message. The parameters needed for CMADMIN to come up are specified correctly. CMADMIN
Failed to get procedure ID The CMCTL session connected to CMADMIN has disconnected. CMADMIN
Out of CCB CMADMIN is unable to process a connection request. There could be two reasons:
  • Faulty load update between CMADMIN and listener

  • Someone is trying to connect to CMADMIN directly (possibly a denial of service attack)

Gateway
No connect data An unknown client is trying to connect to CMADMIN. This is most likely a denial of service attack. CMADMIN
Invalid connect data An unknown client is trying to connect to CMADMIN. This is most likely a denial of service attack. CMADMIN
Housekeeping Informational message. Internal housekeeping for the gateway process is in order. The gateway process is properly connected to the CMADMIN process. Gateway
Connected to Monitor The gateway has connected to CMADMIN. Gateway
State change from Empty to Init State change message from the gateway. Once it reaches a ready state, the gateway begins accepting connections from the client. Gateway
State change from Init to Ready State change message from the gateway. Once it reaches a ready state, the gateway begins accepting connections from the client. Gateway
Idle Timeout The connection was disconnected because it was idle longer than the time specified in cman.ora. Gateway
Session Timeout The connection was disconnected because it exceeded the session timeout specified in cman.ora. Gateway

Tracing Error Information for Oracle Net Services

Tracing produces a detailed sequence of statements that describe network events as they are executed. Tracing an operation enables you to obtain more information on the internal operations of the components of Oracle Net Services than is provided in a log file. This information is output to files that can be evaluated to identify the events that led to an error.


CAUTION:

Tracing uses a large amount of disk space and may have a significant impact upon system performance. Therefore, you should enable tracing only when necessary.

This section contains topics:

Oracle Net Services Trace File Names

Each Oracle Net Services component produces its own trace file. Table 16-10 provides the default trace file names and lists the components that generate the trace files.

Table 16-10 Trace Files

Trace File Component
instance-name_pid.trc Oracle Connection Manager listener
instance-name_cmgw_pid.trc Oracle Connection Manager CMGW (Connection Manager gateway) process
instance-name_cmadmin_pid.trc Oracle Connection Manager CMADMIN (Connection Manager Administration) process
listener.trc Listener
sqlnet.trc Client
svr_pid.trc Database Server
tnsping.trc TNSPING Utility

Setting Tracing Parameters

Parameters that control tracing, including the type and amount of information trace, as well as the location where the files are stored, are set in the configuration file of each network component as described in Table 16-11.

Table 16-11 Location of Trace Parameters

Component Configuration File
Oracle Connection Manager Processes cman.ora
Listener listener.ora
Client sqlnet.ora
Database Server sqlnet.ora
TNSPING Utility sqlnet.ora

This section contains these topics:

sqlnet.ora Trace Parameters

Table 16-12 describes the trace parameters settings that can be set in the sqlnet.ora file.

Table 16-12 sqlnet.ora Trace Parameters

sqlnet.ora Parameter Oracle Net Manager Field Description
TRACE_DIRECTORY_CLIENT Client Information: Trace Directory Establishes the destination directory for the client trace output. By default, the client directory is $ORACLE_HOME/network/trace on UNIX and ORACLE_HOME\network\trace on Windows.
TRACE_DIRECTORY_SERVER Server Information: Trace Directory Establishes the destination directory for the database server trace output. By default, the server directory is $ORACLE_HOME/network/trace on UNIX and ORACLE_HOME\network\trace on Windows.
TRACE_FILE_CLIENT Client Information: Trace File Sets the name of the trace file for the client. By default the trace file name is sqlnet.trc.
TRACE_FILE_SERVER Server Information: Trace File Sets the name of the trace file for the database server. By default the trace file name is svr_pid.trc.
TRACE_FILELEN_CLIENT Not Applicable Specifies the size of the client trace files in kilobytes (KB). When the size is met, the trace information is written to the next file. The number of files is specified with the TRACE_FILENO_CLIENT parameter.
TRACE_FILELEN_SERVER Not Applicable Specifies the size of the database server trace files in kilobytes (KB). When the size is met, the trace information is written to the next file. The number of files is specified with the TRACE_FILENO_CLIENT parameter.
TRACE_FILENO_CLIENT Not Applicable Specifies the number of trace files for client tracing. When this parameter is set along with the TRACE_FILELEN_CLIENT parameter, trace files are used in a cyclical fashion. The first file is filled first, then the second file, and so on. When the last file has been filled, the first file is re-used, and so on.

The trace file names are distinguished from one another by their sequence number. For example, if the default trace file of sqlnet.trc is used, and this parameter is set to 3, the trace files would be named sqlnet1_pid.trc, sqlnet2_pid.trc and sqlnet3_pid.trc.

In addition, trace events in the trace files are preceded by the sequence number of the file.

TRACE_FILENO_SERVER Not Applicable Specifies the number of trace files for database server tracing. When this parameter is set along with the TRACE_FILELEN_SERVER parameter, trace files are used in a cyclical fashion. The first file is filled first, then the second file, and so on. When the last file has been filled, the first file is re-used, and so on.

The trace file names are distinguished from one another by their sequence number. For example, if the default trace file of svr_pid.trc is used, and this parameter is set to 3, the trace files would be named svr1_pid.trc, svr2_pid.trc and svr3_pid.trc.

In addition, trace events in the trace files are preceded by the sequence number of the file.

TRACE_LEVEL_CLIENT Client Information: Trace Level Specifies the level of detail the trace facility records for the client.

The trace level value can either be a value within the range of 0 (zero) to 16 (where 0 is no tracing and 16 represents the maximum amount of tracing) or a value of off, admin, user, or support.

  • off (equivalent to 0) provides no tracing

  • user (equivalent to 4) traces to identify user-induced error conditions

  • admin (equivalent to 6) traces to identify installation-specific problems

  • support (equivalent to 16) provides trace information for troubleshooting information for Oracle Support Services

TRACE_LEVEL_SERVER Server Information: Trace Level Specifies the level of detail the trace facility records for the database server. The trace level value can either be a value within the range of 0 (zero) to 16 (where 0 is no tracing and 16 represents the maximum amount of tracing) or a value of off, admin, user, or support.
  • off (equivalent to 0) provides no tracing

  • user (equivalent to 4) traces to identify user-induced error conditions

  • admin (equivalent to 6) traces to identify installation-specific problems

  • support (equivalent to 16) provides trace information for troubleshooting information for Oracle Support Services

TRACE_TIMESTAMP_CLIENT Not Applicable Adds a time stamp in the form of dd-mon-yyyy hh:mi:ss:mil to every trace event in the client trace file, sqlnet.trc.
TRACE_TIMESTAMP_SERVER Not Applicable Adds a time stamp in the form of dd-mon-yyyy hh:mi:ss:mil to every trace event in the client trace file, sqlnet.trc.
TRACE_UNIQUE_CLIENT Client Information: Unique Trace File Name When the value is set to on, Oracle Net creates a unique file name for each trace session by appending a process identifier to the name of each trace file generated, enabling several files to coexist. For example, trace files named sqlnetpid.trc are created if default trace file name sqlnet.trc is used. When the value is set to off, data from a new client trace session overwrites the existing file.

You can manually add the following TNSPING utility tracing parameters described in Table 16-13 to sqlnet.ora. The TNSPING utility determines whether or not a service (such as a databaseor other TNS services) on a Oracle Net network can be successfully reached.

Table 16-13 TNSPING Trace Parameters

sqlnet.ora Parameter Description
TNSPING.TRACE_DIRECTORY Establishes the destination directory for TNSPING trace file, tnsping.trc. By default, the directory is $ORACLE_HOME/network/trace on UNIX and ORACLE_HOME\network\trace on Windows.
TNSPING.TRACE_LEVEL Specifies the level of detail the trace facility records for the TNSPING utility.

The trace level value can either be a value within the range of 0 (zero) to 16 (where 0 is no tracing and 16 represents the maximum amount of tracing) or a value of off, admin, user, or support.

  • off (equivalent to 0) provides no tracing

  • user (equivalent to 4) traces to identify user-induced error conditions

  • admin (equivalent to 6) traces to identify installation-specific problems

  • support (equivalent to 16) provides trace information for troubleshooting information for Oracle Support Services


listener.ora Trace Parameters

Table 16-14 describes the trace parameters settings for the listener that can be set in the listener.ora file.

Table 16-14 listener.ora Trace Parameters

listener.ora Parameter Oracle Enterprise Manager/Oracle Net Manager Field Description
TRACE_LEVEL_listener_name Select a trace level/Trace Level Specifies the level of detail the trace facility records for the listener.

The trace level value can either be a value within the range of 0 (zero) to 16 (where 0 is no tracing and 16 represents the maximum amount of tracing) or a value of off, admin, user, or support.

  • off (equivalent to 0) provides no tracing

  • user (equivalent to 4) traces to identify user-induced error conditions

  • admin (equivalent to 6) traces to identify installation-specific problems

  • support (equivalent to 16) provides trace information for troubleshooting information for Oracle Support Services

TRACE_DIRECTORY_listener_name

TRACE_FILE_listener_name

Trace File Establishes the destination directory and file for the trace file. By default the directory is $ORACLE_HOME/network/trace on UNIX and ORACLE_HOME\network\trace on Windows, and the file name is listener.trc.
TRACE_FILELEN_listener_name Not Applicable Specifies the size of the listener trace files in kilobytes (KB). When the size is met, the trace information is written to the next file. The number of files is specified with the TRACE_FILENO_listener_name parameter
TRACE_FILENO_listener_name Not Applicable Specifies the number of trace files for listener tracing. When this parameter is set along with the TRACE_FILELEN_listener_name parameter, trace files are used in a cyclical fashion. The first file is filled first, then the second file, and so on. When the last file has been filled, the first file is re-used, and so on.

The trace file names are distinguished from one another by their sequence number. For example, if the default trace file of listener.trc is used, and this parameter is set to 3, the trace files would be named listener1.trc, listener2.trc and listener3.trc.

In addition, trace events in the trace files are preceded by the sequence number of the file.

TRACE_TIMESTAMP_listener_name Not Applicable Adds a time stamp in the form of dd-mon-yyyy hh:mi:ss:mil to every trace event in the listener trace file.

cman.ora Trace Parameters

Table 16-15 describes the trace parameters settings for Oracle Connection Manager that can be set in the cman.ora file.

Table 16-15 cman.ora Trace Parameters

cman.ora Parameter Description
TRACE_DIRECTORY Establishes the destination directory for trace files.

By default, the directory is $ORACLE_HOME/network/trace on UNIX and ORACLE_HOME\network\trace on Windows.

TRACE_FILELEN Specifies the size of the trace file in kilobytes (KB). When the size is met, the trace information is written to the next file. The number of files is specified with the TRACE_FILENO parameter.
TRACE_FILENO Specifies the number of trace files for tracing. When this parameter is set along with the TRACE_FILELEN parameter, trace files are used in a cyclical fashion. The first file is filled first, then the second file, and so on. When the last file has been filled, the first file is reused, and so on.

The trace file names are distinguished from one another by their sequence number. For example, if this parameter is set to 3, the Oracle Connection Manager trace files for the gateway processes would be named instance-name_cmgw1_pid.trc, instance-name_cmgw2_pid.trc and instance-name_cmgw3_pid.trc.

In addition, trace events in the trace files are preceded by the sequence number of the file.

TRACE_LEVEL Specifies the trace level for the Oracle Connection Manager instance. This parameter accepts four trace levels:
  • off (default)—no logging

  • user—user log information

  • admin—administrative log information

  • support—Oracle Support Services information

The Oracle Connection Manager listener, gateway, and CMADMIN processes create trace files on both UNIX and Windows. See Table 16-10 for file name syntax.

TRACE_TIMESTAMP If the TRACING parameter is enabled, adds a time stamp in the form of dd-mon-yyyy hh:mi:ss:mil to every trace event in the trace files.

Setting Tracing Parameters in Configuration Files

You configure tracing parameters for the sqlnet.ora file with Oracle Net Manager and listener.ora file with either Oracle Enterprise Manager or Oracle Net Manager.

You must manually configure cman.ora file tracing parameters.


See Also:

Oracle Net Services Reference Guide

To set tracing parameters with Oracle Enterprise Manager and Oracle Net Manager:

Trace File Tool Set logging parameters here...
sqlnet.trc (for the client)

svr_pid.trc (for the server)

Oracle Net Manager
  1. Start Oracle Net Manager.

See Also: "Oracle Net Manager"

  1. In the navigator pane, expand Local > Profile.

  2. From the list in the right pane, select General.

  3. Click the Tracing tab.

  4. Specify the settings.

  5. Choose File > Save Network Configuration.

listener.trc Oracle Enterprise Manager
  1. Access the Oracle Net Administration page in Oracle Enterprise Manager.

See Also: "Oracle Enterprise Manager"

  1. Select Listeners from the Administer list, and then select the Oracle home that contains the location of the configuration files.

  2. Click Go.

The Listeners page appears.

  1. Select a listener, and then click Edit.

The Edit Listeners page appears.

  1. Click the Logging & Tracing tab.

  2. Specify the settings.

  3. Click OK.

listener.trc Oracle Net Manager
  1. Start Oracle Net Manager.

See Also: "Oracle Net Manager"

  1. In the navigator pane, expand Local > Listeners.

  2. Select a listener.

  3. From the list in the right pane, select General.

  4. Click the Logging and Tracing tab.

  5. Specify the settings.

  6. Choose File > Save Network Configuration.


Setting Tracing Settings During Runtime of Control Utilities

You can set tracing during control utility runtime. Setting tracing with a control utility does not set parameters in the *.ORA files; the setting is only valid for the session of the control utility:

  • For the listener, use the SET TRC_DIRECTORY, SET TRC_FILE, and SET TRC_LEVEL commands from the Listener Control utility.

  • For an Oracle Connection Manager, use the SET TRACE_DIRECTORY and SET TRACE_LEVEL, and SET TRACE_TIMESTAMP commands from the Oracle Connection Manager control utility.


    See Also:

    Oracle Net Services Reference Guide

Evaluating Oracle Net Services Traces

Trace files can help Oracle Support Service diagnose and troubleshoot network problems.

This section explains how to perform basic analysis of trace files. The topics discussed include:

Flow of Data Packets Between Network Nodes

Oracle Net performs its functions by sending and receiving data packets.By specifying a trace level of support, you can view the actual contents of the Oracle Net packet in your trace file. The order of the packet types sent and received will help you to determine how your connection was established.

Oracle Net Data Packet Formats

Each line in the trace file begins with a procedure followed by a message. Following each procedure is a line of hexadecimal data representing actual data. The actual data that flows inside the packet is sometimes viewable to the right of the hexadecimal data.

Next is a list of the Oracle Net packet keywords and descriptions of the types of packets they represent:

Keyword Packet Type
NSPTCN Connect
NSPTAC Accept
NSPTRF Refuse
NSPTRS Resend
NSPTDA Data
NSPCNL Control
NSPTMK Marker

For example, the following line describes a procedure called "nscon" sending a NSPTCN packet over the network:

nscon: sending NSPTCN packet

Each packet has a keyword that denotes the packet type. All packet types begin with the prefix "nsp". It is helpful to remember this when reviewing trace files for specific packet information

Example 16-2 provides typical packet information.

Example 16-2 Packet Information

nscon: entry
nscon: doing connect handshake...
nscon: sending NSPTCN packet
nspsend: entry
nspsend: plen=187, type=1
nspsend: 187 bytes to transport
nspsend:packet dump
nspsend:00 BB 00 00 01 00 00 00  |........|
nspsend:01 33 01 2C 0C 01 08 00  |.3.,....|
nspsend:7F FF 7F 08 00 00 00 01  |........|
nspsend:00 99 00 22 00 00 08 00  |..."....|
nspsend:01 01 28 44 45 53 43 52  |..(DESCR|
nspsend:49 50 54 49 4F 4E 3D 28  |IPTION=(|
nspsend:43 4F 4E 4E 45 43 54 5F  |CONNECT_|
nspsend:44 41 54 41 3D 28 53 49  |DATA=(SI|
nspsend:44 3D 61 70 33 34 37 64  |D=ap347d|
nspsend:62 31 29 28 43 49 44 3D  |b1)(CID=|
nspsend:28 50 52 4F 47 52 41 4D  |(PROGRAM|
nspsend:3D 29 28 48 4F 53 54 3D  |=)(HOST=|
nspsend:61 70 32 30 37 73 75 6E  |ap207sun|
nspsend:29 28 55 53 45 52 3D 6D  |)(USER=m|
nspsend:77 61 72 72 65 6E 29 29  |warren))|
nspsend:29 28 41 44 44 52 45 53  |)(ADDRES|
nspsend:53 5F 4C 49 53 54 3D 28  |S_LIST=(|
nspsend:41 44 44 52 45 53 53 3D  |ADDRESS=|
nspsend:28 50 52 4F 54 4F 43 4F  |(PROTOCO|
nspsend:4C 3D 74 63 70 29 28 48  |L=tcp)(H|
nspsend:4F 53 54 3D 61 70 33 34  |OST=ap34|
nspsend:37 73 75 6E 29 28 50 4F  |7sun)(PO|
nspsend:52 54 3D 31 35 32 31 29  |RT=1521)|
nspsend:29 29 29 00 00 00 00 00  |))).....|
nspsend: normal exit
nscon: exit (0)

Pertinent Oracle Net Trace Error Output

When there is a problem a connection, the error code is logged in the trace file. Example 16-3 depicts typical trace file output for a failed SQL*Plus connection to a database server.

Example 16-3 Trace Example

[22-JUL-2002 13:34:07:687] nsprecv: entry
[22-JUL-2002 13:34:07:687] nsbal: entry
[22-JUL-2002 13:34:07:687] nsbgetfl: entry
[22-JUL-2002 13:34:07:687] nsbgetfl: normal exit
[22-JUL-2002 13:34:07:687] nsmal: entry
[22-JUL-2002 13:34:07:687] nsmal: 44 bytes at 0x132d90
[22-JUL-2002 13:34:07:687] nsmal: normal exit
[22-JUL-2002 13:34:07:687] nsbal: normal exit
[22-JUL-2002 13:34:07:687] nsprecv: reading from transport...
[22-JUL-2002 13:34:07:687] nttrd: entry
[22-JUL-2002 13:35:09:625] nttrd: exit
[22-JUL-2002 13:35:09:625] ntt2err: entry
[22-JUL-2002 13:35:09:625] ntt2err: Read unexpected EOF ERROR on 10
[22-JUL-2002 13:35:09:625] ntt2err: exit
[22-JUL-2002 13:35:09:625] nsprecv: transport read error
[22-JUL-2002 13:35:09:625] nsprecv: error exit
[22-JUL-2002 13:35:09:625] nserror: entry
[22-JUL-2002 13:35:09:625] nserror: nsres: id=0, op=68, ns=12537, ns2=12560; 
nt[0]=507, nt[1]=0, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
[22-JUL-2002 13:35:09:625] nscon: error exit
[22-JUL-2002 13:35:09:625] nsdo: nsctxrnk=0
[22-JUL-2002 13:35:09:625] nsdo: error exit
[22-JUL-2002 13:35:09:625] nscall: unexpected response
[22-JUL-2002 13:35:09:625] nsclose: entry
[22-JUL-2002 13:35:09:625] nstimarmed: entry
[22-JUL-2002 13:35:09:625] nstimarmed: no timer allocated
[22-JUL-2002 13:35:09:625] nstimarmed: normal exit
[22-JUL-2002 13:35:09:625] nsdo: entry
[22-JUL-2002 13:35:09:625] nsdo: cid=0, opcode=98, *bl=0, *what=0,
uflgs=0x440, cflgs=0x2
[22-JUL-2002 13:35:09:625] nsdo: rank=64, nsctxrnk=0
[22-JUL-2002 13:35:09:625] nsdo: nsctx: state=1, flg=0x4201, mvd=0
[22-JUL-2002 13:35:09:625] nsbfr: entry
[22-JUL-2002 13:35:09:625] nsbaddfl: entry
[22-JUL-2002 13:35:09:625] nsbaddfl: normal exit
[22-JUL-2002 13:35:09:625] nsbfr: normal exit
[22-JUL-2002 13:35:09:625] nsbfr: entry
[22-JUL-2002 13:35:09:625] nsbaddfl: entry
[22-JUL-2002 13:35:09:625] nsbaddfl: normal exit
[22-JUL-2002 13:35:09:625] nsbfr: normal exit
[22-JUL-2002 13:35:09:625] nsdo: nsctxrnk=0
[22-JUL-2002 13:35:09:625] nsdo: normal exit
[22-JUL-2002 13:35:09:625] nsclose: closing transport
[22-JUL-2002 13:35:09:625] nttdisc: entry
[22-JUL-2002 13:35:09:625] nttdisc: Closed socket 10
[22-JUL-2002 13:35:09:625] nttdisc: exit
[22-JUL-2002 13:35:09:625] nsclose: global context check-out (from slot 0)
complete
[22-JUL-2002 13:35:09:703] nsnadisc: entry
[22-JUL-2002 13:35:09:703] nadisc: entry
[22-JUL-2002 13:35:09:703] nacomtm: entry
[22-JUL-2002 13:35:09:703] nacompd: entry
[22-JUL-2002 13:35:09:703] nacompd: exit
[22-JUL-2002 13:35:09:703] nacompd: entry
[22-JUL-2002 13:35:09:703] nacompd: exit
[22-JUL-2002 13:35:09:703] nacomtm: exit
[22-JUL-2002 13:35:09:703] nas_dis: entry
[22-JUL-2002 13:35:09:703] nas_dis: exit
[22-JUL-2002 13:35:09:703] nau_dis: entry
[22-JUL-2002 13:35:09:703] nau_dis: exit
[22-JUL-2002 13:35:09:703] naeetrm: entry
[22-JUL-2002 13:35:09:703] naeetrm: exit
[22-JUL-2002 13:35:09:703] naectrm: entry
[22-JUL-2002 13:35:09:703] naectrm: exit
[22-JUL-2002 13:35:09:703] nagbltrm: entry
[22-JUL-2002 13:35:09:703] nau_gtm: entry
[22-JUL-2002 13:35:09:703] nau_gtm: exit
[22-JUL-2002 13:35:09:703] nagbltrm: exit
[22-JUL-2002 13:35:09:703] nadisc: exit
[22-JUL-2002 13:35:09:703] nsnadisc: normal exit
[22-JUL-2002 13:35:09:703] nsbfr: entry
[22-JUL-2002 13:35:09:703] nsbaddfl: entry
[22-JUL-2002 13:35:09:703] nsbaddfl: normal exit
[22-JUL-2002 13:35:09:703] nsbfr: normal exit
[22-JUL-2002 13:35:09:703] nsmfr: entry
[22-JUL-2002 13:35:09:703] nsmfr: 2256 bytes at 0x130508
[22-JUL-2002 13:35:09:703] nsmfr: normal exit
[22-JUL-2002 13:35:09:703] nsmfr: entry
[22-JUL-2002 13:35:09:703] nsmfr: 484 bytes at 0x1398a8
[22-JUL-2002 13:35:09:703] nsmfr: normal exit
[22-JUL-2002 13:35:09:703] nsclose: normal exit
[22-JUL-2002 13:35:09:703] nscall: connecting...
[22-JUL-2002 13:35:09:703] nsclose: entry
[22-JUL-2002 13:35:09:703] nsclose: normal exit
[22-JUL-2002 13:35:09:703] nladget: entry
[22-JUL-2002 13:35:09:734] nladget: exit
[22-JUL-2002 13:35:09:734] nsmfr: entry
[22-JUL-2002 13:35:09:734] nsmfr: 144 bytes at 0x132cf8
[22-JUL-2002 13:35:09:734] nsmfr: normal exit
[22-JUL-2002 13:35:09:734] nsmfr: entry
[22-JUL-2002 13:35:09:734] nsmfr: 156 bytes at 0x138e70
[22-JUL-2002 13:35:09:734] nsmfr: normal exit
[22-JUL-2002 13:35:09:734] nladtrm: entry
[22-JUL-2002 13:35:09:734] nladtrm: exit
[22-JUL-2002 13:35:09:734] nscall: error exit
[22-JUL-2002 13:35:09:734] nioqper:  error from nscall
[22-JUL-2002 13:35:09:734] nioqper:    ns main err code: 12537
[22-JUL-2002 13:35:09:734] nioqper:    ns (2)  err code: 12560
[22-JUL-2002 13:35:09:734] nioqper:    nt main err code: 507
[22-JUL-2002 13:35:09:734] nioqper:    nt (2)  err code: 0
[22-JUL-2002 13:35:09:734] nioqper:    nt OS   err code: 0
[22-JUL-2002 13:35:09:734] niomapnserror: entry
[22-JUL-2002 13:35:09:734] niqme: entry
[22-JUL-2002 13:35:09:734] niqme: reporting NS-12537 error as ORA-12537
[22-JUL-2002 13:35:09:734] niqme: exit
[22-JUL-2002 13:35:09:734] niomapnserror: returning error 12537
[22-JUL-2002 13:35:09:734] niomapnserror: exit
[22-JUL-2002 13:35:09:734] niotns: Couldn't connect, returning 12537
[22-JUL-2002 13:35:10:734] niotns: exit
[22-JUL-2002 13:35:10:734] nsbfrfl: entry
[22-JUL-2002 13:35:10:734] nsbrfr: entry
[22-JUL-2002 13:35:10:734] nsbrfr: nsbfs at 0x132d90, data at 0x132dc8.
[22-JUL-2002 13:35:10:734] nsbrfr: normal exit
[22-JUL-2002 13:35:10:734] nsbrfr: entry
[22-JUL-2002 13:35:10:734] nsbrfr: nsbfs at 0x1248d8, data at 0x132210.
[22-JUL-2002 13:35:10:734] nsbrfr: normal exit
[22-JUL-2002 13:35:10:734] nsbrfr: entry
[22-JUL-2002 13:35:10:734] nsbrfr: nsbfs at 0x12d820, data at 0x1319f0.
[22-JUL-2002 13:35:10:734] nsbrfr: normal exit
[22-JUL-2002 13:35:10:734] nsbfrfl: normal exit
[22-JUL-2002 13:35:10:734] nigtrm: Count in the NI global area is now 1
[22-JUL-2002 13:35:10:734] nigtrm: Count in the NL global area is now 1

The most efficient way to evaluate error codes is to find the most recent nserror entry logged, as the session layer controls the connection. The most important error messages are the ones at the bottom of the file. They are the most recent errors and the source of the problem with the connection.

For information about the specific return codes, use the Oracle UNIX error tool oerr, by entering the following at any command line:

oerr tns error_number

As an example, consider the following nserror entry logged in the trace file shown in Figure 16-0:

[22-JUL-2002 13:35:09:625] nserror: nsres: id=0, op=68, ns=12537, ns2=12560;
nt[0]=507, nt[1]=0, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0

Using oerr, you can find out more information about return codes 12537 and 507. (Bold denotes user input.)

oerr tns 12537
12537, 00000, "TNS:connection closed"
// *Cause: "End of file" condition has been reached; partner has
disconnected.
// *Action: None needed; this is an information message.

oerr tns 507
00507, 00000, "Connection closed"
// *Cause: Normal "end of file" condition has been reached; partner has
// disconnected.
// *Action: None needed; this is an information message.

Using the Trace Assistant to Examine Trace Files

Oracle Net Services provides a tool called the Trace Assistant to help you understand the information provided in trace files by converting existing lines of trace file text into a more readable paragraph. Note that the Trace Assistant runs against only a level 16 (support) Oracle Net Services trace file.

This section contains the following topics:

Trace Assistant Syntax

To run the Trace Assistant, enter the following at any command line prompt:

trcasst [options] <filename>

The options are described in Table 16-16.

Table 16-16 Trace Assistant Syntax

Option Description
-elevel Displays error information. After the -e, zero or one error decoding level may follow:
  • 0 or nothing translates the NS error numbers dumped from the nserror function plus lists all other errors

  • 1 displays only the NS error translation from the nserror function

  • 2 displays error numbers without translation

-la If a connection ID exists in the NS connect packet, then the output displays the connection IDs. Connection IDs are displayed as hexadecimal, eight-byte IDs. A generated ID is created by Trace Assistant if the packet is not associated with any connection, that is, the connect packet is overwritten in the trace file. This can occur with cyclic trace files.

For each ID, the output lists the following:

  • Socket ID, if the connection has one

  • Connect packet send or receive operation

  • Current setting of the MULTIPLEX attribute of the DISPATCHERS parameter in the initialization parameter file. When MULTIPLEX is set to ON, session multiplexing is enabled.

  • Session ID, if MULTIPLEX is set to ON

  • Connect data information

Notes:

  • Do not use this option with other options.

  • The IDs generated by the Trace Assistant do not correlate with client/server trace files.

-li ID Displays the trace for a particular ID from the -la output

Note: Only use this option with output from the -la option.

-otype Displays the amount and type of information to be output. After the -o the following options can be used:
  • c to display summary connectivity information

  • d to display detailed connectivity information

  • u to display summary Two-Task Common (TTC) information

  • t to display detailed TTC information

  • q to display SQL commands enhancing summary TTC information. Use this option with u, such as -ouq.

Note: As output for d contains the same information as displayed for c, do not submit both c and d. If you submit both, then only output d will be processed.

-p Oracle internal use only
-s Displays the following statistical information:
  • Total number of bytes sent and received

  • Maximum open cursors

  • Currently open cursors

  • Count and ratio of operations

  • Parsing and execution count for PL/SQL

  • Total calls sent and received

  • Total, average, and maximum number of bytes sent and received

  • Total number of transports and sessions present

  • Timestamp information, if any

  • Sequence numbers, if any


If no options are provided, then the default is -odt -e0 -s, providing detailed connectivity and TTC events, error level zero (0), and statistics in the trace file.

Example 16-4 shows how the Trace Assistant converts trace file information into a more readable format.

Example 16-4 Trace File with Error

ntus2err: exit 
ntuscni: exit 
ntusconn: exit 
nserror: entry 
-<ERROR>- nserror: nsres: id=0, op=65, ns=12541, ns2=12560; nt[0]=511, nt[1]=2, nt[2]=0 

Example 16-5 shows how the Trace Assistant converts the trace file information into a more readable format with the -e1 option.

Example 16-5 trcasst -e1 Output

************************************************************************* 
    *                        Trace Assistant                                * 
    ************************************************************************* 

ntus2err: exit 
ntuscni: exit 
ntusconn: exit 
nserror: entry 
-<ERROR>- nserror: nsres: id=0, op=65, ns=12541, ns2=12560; nt[0]=511, nt[1]=2, nt[2]=0 
/////////////////////////////////////////////////////////////// 
Error found. Error Stack follows: 
              id:0 
  Operation code:65 
      NS Error 1:12541 
      NS Error 2:12560 
NT Generic Error:511 
  Protocol Error:2 
        OS Error:0 
 NS & NT Errors Translation 
12541, 00000 "TNS:no listener" 
 // *Cause: The connection request could not be completed because the listener 
 // is not running. 
 // *Action: Ensure that the supplied destination address matches one of 
 // the addresses used by the listener - compare the TNSNAMES.ORA entry with 
 // the appropriate LISTENER.ORA file (or TNSNAV.ORA if the connection is to 
 // go by way of an Interchange). Start the listener on the remote machine. 
/ 
12560, 00000 "TNS:protocol adapter error" 
 // *Cause: A generic protocol adapter error occurred. 
 // *Action: Check addresses used for proper protocol specification. Before 
 // reporting this error, look at the error stack and check for lower level 
 // transport errors.For further details, turn on tracing and reexecute the 
 // operation. Turn off tracing when the operation is complete. 
/ 
00511, 00000 "No listener" 
 // *Cause: The connect request could not be completed because no application 
 // is listening on the address specified, or the application is unable to 
 // service the connect request in a sufficiently timely manner. 
 // *Action: Ensure that the supplied destination address matches one of 
 // the addresses used by the listener - compare the TNSNAMES.ORA entry with 
 // appropriate LISTENER.ORA file (or TNSNAV.ORA if the connection is to go 
 // by way of an Interchange. Start the listener on the remote machine. 
/ 
/////////////////////////////////////////////////////////////// 
    ************************************************************************* 
    *                    Trace Assistant has completed                      * 
    ************************************************************************* 

However, other errors may also exist within the trace file that were not logged from the nserror function.

Packet Examples

Trace Assistant also enables you to view data packets from both the Oracle Net and TTC communication layers. Trace Assistant offers you two options to view these packets:

  • Summary connectivity (using option -oc)

  • Detailed connectivity (using option -od)

Example: Summary Data Packets Sent in a Connection

Example 16-6 shows summary information from the -oc option. The output shows....

Example 16-6 trcasst -oc Output

************************************************************************* 
    *                        Trace Assistant                                * 
    ************************************************************************* 

---> Send 198 bytes - Connect packet 
Connect data length: 140 
Connect Data: 
    (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=sales-server)(PORT=1521))
    (CONNECT_DATA=(SERVICE_NAME=sales.us.acme.com)(CID=(PROGRAM=)
    (HOST=sales-server)(USER=joe)))) 
  
<--- Received 76 bytes - Redirect packet 
Redirect data length: 66 
Redirect Data: 
    (ADDRESS=(PROTOCOL=tcp)(HOST=sales-server)(PORT=1521)) 

---> Send 198 bytes - Connect packet 
Connect data length: 140 
Connect Data: 
    (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=sales-server)(PORT=1521))
    (CONNECT_DATA=(SERVICE_NAME=sales.us.acme.com)(CID=(PROGRAM=)
    (HOST=sales-server)(USER=joe)))) 
  
<--- Received 32 bytes - Accept packet 
Connect data length: 0 
---> Send 153 bytes - Data packet 
        Native Services negotiation packet 

<--- Received 127 bytes - Data packet 
        Native Services negotiation packet 

---> Send 32 bytes - Data packet 

<--- Received 140 bytes - Data packet 

    ************************************************************************* 
    *                    Trace Assistant has completed                      * 
    ************************************************************************* 

Note that the packets being sent or received have a prefix of "---> Send nnn bytes" or "<--- Received nnn bytes" showing that this node is sending or receiving a packet of a certain type and with nnn number of bytes. This prefix enables you to determine if the node is the client or the database server. The connection request is always sent by the client, but received by the database server (or listener).

Example: Detailed Data Packets Sent in a Connection

Example 16-7 shows detailed information from the -od option. The output shows all of the details sent along with the connect data in negotiating a connection.

Example 16-7 trcasst -od Output

************************************************************************* 
    *                        Trace Assistant                                * 
    ************************************************************************* 
--->  Send   241 bytes - Connect packet
Current NS version number is: 311.
Lowest NS version number can accommodate is: 300.
Global options for the connection:
        can receive attention
        no attention processing
        Don't care
        Maximum SDU size:2048
        Maximum TDU size:32767
        NT protocol characteristics:
                        Test for more data
                        Test operation
                        Full duplex I/O
                        Urgent data support
                        Generate SIGURG signal
                        Generate SIGPIPE signal
                        Generate SIGIO signal
                        Handoff connection to another
        Line turnaround value :0
        Connect data length :183
        Connect data offset :58
        Connect data maximum size :512
                        Native Services wanted
                        NAU doing O3LOGON - DH key foldedin
                        Native Services wanted
                        NAU doing O3LOGON - DH key foldedin
        Cross facility item 1: 0
        Cross facility item 2: 0
        Connection id : Ox000059F70000004C
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=sales-server)(PORT=1521))
(CONNECT_DATA=(SERVICE_NAME=sales.us.acme.com)(SRVR=SHARED)(CID=(PROGRAM=)
(HOST=sales-server)(USER=joe))))

<--- Received 76 bytes - Redirect packet
        Redirect data length: 66
(ADDRESS=(PROTOCOL=tcp)(HOST=sales-server)(PORT=1521))

--->  Send   241 bytes - Connect packet
Current NS version number is: 311.
Lowest NS version number can accommodate is: 300.
Global options for the connection:
                can receive attention
                no attention processing
                Don't care
                Maximum SDU size:2048
                Maximum TDU size:32767
                NT protocol characteristics:
                        Test for more data
                        Test operation
                        Full duplex I/O
                        Urgent data support
                        Generate SIGURG signal
                        Generate SIGPIPE signal
                        Generate SIGIO signal
                        Handoff connection to another
        Line turnaround value :0
        Connect data length :183
        Connect data offset :58
        Connect data maximum size :512
                        Native Services wanted
                        NAU doing O3LOGON - DH key foldedin
                        Native Services wanted
                        NAU doing O3LOGON - DH key foldedin
        Cross facility item 1: 0
        Cross facility item 2: 0
        Connection id : Ox000059F70000007A
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=sales-server)(PORT=1521))
(CONNECT_DATA=(SERVICE_NAME=sales.us.acme.com)(SRVR=SHARED)(CID=(PROGRAM=)
(HOST=sales-server)(USER=joe))))
<--- Received 32 bytes - Accept packet
                Accepted NS version number is: 310.
Global options for the connection: 
                no attention processing
                Don't care
                Accepted maximum SDU size: 2048 
                Accepted maximum TDU size: 32767 
                Connect data length: 0
                                        Native Services wanted
                                        NAU doing O3LOGON - DH key foldedin
                                        Native Services wanted
                                        NAU doing O3LOGON - DH key foldedin

--->  Send   153 bytes - Data packet
        Native Services negotiation packet version#: 150999040
                                        Service data packet #0 for Supervisor has 3 subpackets
                                                Subpacket #0:  Version #150999040
                                                Subpacket #1: 0000000000000000
                                                Subpacket #2: DEADBEEF0003000000040004000100010002
                                        Service data packet #1 for Authentication has 3 subpackets
                                                Subpacket #0:  Version #150999040
                                                Subpacket #1: UB2: 57569
                                                Subpacket #2: FCFF
                                        Service data packet #2 for Encryption has 2 subpackets
                           Subpacket #0:  Version #150999040
                                                   Subpacket #1: 000000000000000000
                                        Service data packet #3 for Data Integrity has 2 subpackets
                                                Subpacket #0:  Version #150999040
                                                Subpacket #1: 000000

<--- Received 127 bytes - Data packet
        Native Services negotiation packet version#: 135290880
                        Service data packet #0 for Supervisor has 3 subpackets
                                                Subpacket #0:  Version #135290880
                                                   Subpacket #1: 0000
                                                Subpacket #2: DEADBEEF00030000000200040001
                                        Service data packet #1 for Authentication has 2 subpackets
                                                Subpacket #0:  Version #135290880
                                                   Subpacket #1: FBFF
                                        Service data packet #2 for Encryption has 2 subpackets
                                                Subpacket #0:  Version #135290880
                                                   Subpacket #1: UB1: 0
                                        Service data packet #3 for Data Integrity has 2 subpackets
                                                   Subpacket #0:  Version #135290880
                                                   Subpacket #1: UB1: 0
....

--->  Send   11 bytes - Marker packet
              One data byte. 
              Hex character sent over to the server: 2

<--- Received 11 bytes - Marker packet
         One data byte. 
             Hex character sent over to the server: 2

<--- Received 155 bytes - Data packet

--->  Send   25 bytes - Data packet

<--- Received 11 bytes - Data packet

--->  Send   13 bytes - Data packet

<--- Received 11 bytes - Data packet

--->  Send   10 bytes - Data packet
        Data Packet flags:
                End of file
    ************************************************************************* 
    *                    Trace Assistant has completed                      * 
    ************************************************************************* 

Two-Task Common Packet Examples

TTC handles requests such as open cursor, select rows, and update rows that are directed to the database server. All requests are answered by the database server. If you request to logon, a response is returned from the database server that the request was completed.

Example: Two-Task Common Summary Information with Summary TTC Information

Summary information for TTC from the -ou option is different from other displays in that it shows two packets on each line, rather than one. This is done to mirror the request/response pairings process by which TTC operates.

Example 16-8 shows all of the details sent along with the connect data in negotiating a connection.

Example 16-8 trcasst -ou Output

************************************************************************* 
    *                        Trace Assistant                                * 
    ************************************************************************* 

                                                                    Bytes  Bytes 
                                                                     Sent   Rcvd 

Send operation(TTIPRO)                                                 32    140 
Send operation(TTIDTY)                                                 33     22 
Get the session key (OSESSKEY)                                        229    145 
Generic authentication call (OAUTH)                                   368   1001 
Send operation(TTIPFN)                                                 44    144 
Send operation(TTIPFN)                                                 36     16 
Parse a statement (OSQL)                 # 1  SELECT USER FROM ...     47    100 
Fast upi calls to opial7 (OALL7)         # 1                          130    111 
Fetch row (OFETCH)                       # 1                           21    137 
Close cursor (OCLOSE)                    # 1                           17     11 
New v8 bundled call (OALL8)              # 0  !Keep Parse  BEGI...    156    145 
Send operation(TTIPFN)                                                 51     16 
Parse a statement (OSQL)                 # 1  SELECT ATTRIBUTE,...    186    100 
Fast upi calls to opial7 (OALL7)         # 1                          246    111 
Fetch row (OFETCH)                       # 1                           21    126 
Close cursor (OCLOSE)                    # 1                           17     11 
Send operation(TTIPFN)                                                 36     16 
Parse a statement (OSQL)                 # 1  SELECT CHAR_VALUE...    208    100 
Fast upi calls to opial7 (OALL7)         # 1                          130    111 
Fetch row (OFETCH)                       # 1                           21    126 
Close cursor (OCLOSE)                    # 1                           17     11 
Send operation(TTIPFN)                                                 36     16 
Fast upi calls to opial7 (OALL7)         # 1  !Keep Parse  BEGI...    183     41 
Send operation(TTIRXD)                                                 20    111 
Close cursor (OCLOSE)                    # 1                           17     11 
New v8 bundled call (OALL8)              # 0  Parse Fetch  SELE...    165    278 
Send operation(TTIPFN)                                                 51     16 
Parse a statement (OSQL)                 # 1  commit                   31    100 
Execute statement (OEXEC)                # 1  number of rows: 1        25    100 
Close cursor (OCLOSE)                    # 1                           17     11 
Send operation(TTIPFN)                                                 36     16 
Fast upi calls to opial7 (OALL7)         # 1  !Keep Parse  BEGI...    183     41 
Send operation(TTIRXD)                                                 60    111 
Close cursor (OCLOSE)                    # 1                           17     11 
Send operation(TTIPFN)                                                 36     16 
Fast upi calls to opial7 (OALL7)         # 1  !Keep Parse  BEGI...    183     41 
Send operation(TTIRXD)                                                 20    111 
Close cursor (OCLOSE)                    # 1                           17     11 
New v8 bundled call (OALL8)              # 0  Parse Fetch  sele...    144    383 
New v8 bundled call (OALL8)              # 1  !Keep Fetch             121    315 
Logoff off of Oracle (OLOGOFF)                                         13     11

    ************************************************************************* 
    *                    Trace Assistant has completed                      * 
    ************************************************************************* 

Output is displayed in the following format:

description TTC_message cursor_number SQL_statement bytes_sent bytes_received

On each line of the output, the first item displayed is the actual request made. The second item shows on what cursor that operation has performed. The third item is either a listing of the SQL command or flag that is being answered. The number of bytes sent and received are displayed at the far right. A flag can be one of the following:

!PL/SQL = Not a PL/SQL request
COM = Commit
IOV = Get I/O Vector
DEFN = Define
EXEC = Execute
FETCH = Fetch
CAN = Cancel
DESCSEL = Describe select
DESCBND = Describe Bind
BND = Bind
PARSE = Parse
EXACT = Exact

Example: Detailed SQL Information on Top of Summary Two-Task

Example 16-9 shows detailed SQL information from the -ouq option.

Example 16-9 trcasst -ouq Output

************************************************************************* 
    *                        Trace Assistant                                * 
    ************************************************************************* 
                                                                    Bytes  Bytes 
                                                                     Sent   Rcvd 

Send operation(TTIPRO)                                                 32    140 
Send operation(TTIDTY)                                                 33     22 
Get the session key (OSESSKEY)                                        229    145 
Generic authentication call (OAUTH)                                   368   1001 
Send operation(TTIPFN)                                                 44    144 
Send operation(TTIPFN)                                                 36     16 
Parse a statement (OSQL)                 # 1                           47    100 
          SELECT USER FROM DUAL 

Fast upi calls to opial7 (OALL7)         # 1                          130    111 
Fetch row (OFETCH)                       # 1                           21    137 
Close cursor (OCLOSE)                    # 1                           17     11 
New v8 bundled call (OALL8)              # 0  !Keep Parse             156    145 
          BEGIN DBMS_OUTPUT.DISABLE; END; 

Send operation(TTIPFN)                                                 51     16 
Parse a statement (OSQL)                 # 1                          186    100 
          SELECT ATTRIBUTE,SCOPE,NUMERIC_VALUE,CHAR_VALUE,DA 
          TE_VALUE FROM SYSTEM.PRODUCT_PRIVS WHERE (UPPER('S 
          QL*Plus') LIKE UPPER(PRODUCT)) AND (UPPER(USER) LI 
          KE USERID) 

Fast upi calls to opial7 (OALL7)         # 1                          246    111 
Fetch row (OFETCH)                       # 1                           21    126 
Close cursor (OCLOSE)                    # 1                           17     11 
Send operation(TTIPFN)                                                 36     16 
Parse a statement (OSQL)                 # 1                          208    100 
          SELECT CHAR_VALUE FROM SYSTEM.PRODUCT_PRIVS WHERE 
          (UPPER('SQL*Plus') LIKE UPPER(PRODUCT)) AND ((UPPE 
          R(USER) LIKE USERID) OR (USERID = 'PUBLIC')) AND ( 
          UPPER(ATTRIBUTE) = 'ROLES') 

Fast upi calls to opial7 (OALL7)         # 1                          130    111 
Fetch row (OFETCH)                       # 1                           21    126 
Close cursor (OCLOSE)                    # 1                           17     11 
Send operation(TTIPFN)                                                 36     16 
Fast upi calls to opial7 (OALL7)         # 1  !Keep Parse             183     41 
          BEGIN DBMS_APPLICATION_INFO.SET_MODULE(:1,NULL); E 
          ND; 

Send operation(TTIRXD)                                                 20    111 
Close cursor (OCLOSE)                    # 1                           17     11 
New v8 bundled call (OALL8)              # 0  Parse Fetch             165    278 
          SELECT DECODE('A','A','1','2') FROM DUAL 

Send operation(TTIPFN)                                                 51     16 
Parse a statement (OSQL)                 # 1                           31    100 
          commit 

Execute statement (OEXEC)                # 1  number of rows: 1        25    100 
Close cursor (OCLOSE)                    # 1                           17     11 
Send operation(TTIPFN)                                                 36     16 
Fast upi calls to opial7 (OALL7)         # 1  !Keep Parse             183     41 
          BEGIN DBMS_APPLICATION_INFO.SET_MODULE(:1,NULL); E 
          ND; 

Send operation(TTIRXD)                                                 60    111 
Close cursor (OCLOSE)                    # 1                           17     11 
Send operation(TTIPFN)                                                 36     16 
Fast upi calls to opial7 (OALL7)         # 1  !Keep Parse             183     41 
          BEGIN DBMS_APPLICATION_INFO.SET_MODULE(:1,NULL); E 
          ND; 

Send operation(TTIRXD)                                                 20    111 
Close cursor (OCLOSE)                    # 1                           17     11 
New v8 bundled call (OALL8)              # 0  Parse Fetch             144    383 
          select * from dept 

New v8 bundled call (OALL8)              # 1  !Keep Fetch             121    315 
Logoff off of Oracle (OLOGOFF)                                         13     11 
  
    ************************************************************************* 
    *                    Trace Assistant has completed                      * 
    ************************************************************************* 

Example: Two-Task Common Summary Information with Detailed TTC Information

Example 16-10 shows detailed TTC information from the -ot option.

Example 16-10 trcasst -ot Output

*************************************************************************
    *                        Trace  Assistant                                  *            
    *************************************************************************

Set protocol (TTIPRO)
        Operation 01 (con) Send protocol version=6
        Originating platform: SVR4-be-8.1.0

Set protocol (TTIPRO)
        Operation 01 (con) Receive protocol version=6
        Destination platform: SVR4-be-8.1.0

Set datatypes (TTIDTY)

Set datatypes (TTIDTY)

Start of user function (TTIFUN)
              (OSESSKEY)

Return opi parameter (TTIRPA)

Start of user function (TTIFUN)
        (OAUTH)

Return opi parameter (TTIRPA)

Start of user function (TTIFUN)
              session operations 71 (O71SESOPN) (switch session)

Return opi parameter (TTIRPA)

Start of user function (TTIFUN)
        Get Oracle version/date string in new format (OVERSION)

Return opi parameter (TTIRPA)
Oracle Enterprise Edition Release 10.1.0.2.0
With the Partitioning option
JServer Release 10.1.0.2.0

Start of user function (TTIFUN)
        session operations 71 (O71SESOPN) (switch session)

Return opi parameter (TTIRPA)

Start of user function (TTIFUN)
              Open a cursor (OOPEN)

Return opi parameter (TTIRPA)
        Cursor #: 1

Start of user function (TTIFUN)
              Parse a statement (OSQL) Cursor # 1
SELECT USER FROM DUAL
    ************************************************************************* 
    *                    Trace Assistant has completed                      * 
    ************************************************************************* 

Connection Example

Example 16-11 shows output from the -la option. The output shows the following information:

  • Connect IDs received

  • Socket ID on which this connection has come

  • Operation

    Receive identifies the trace as a database server trace; Send identifies the trace as a client trace. In this output, Receive is the operation.

  • MULTIPLEX attribute of the DISPATCHERS parameter is set to ON

  • 32-bit session ID

  • Connect data information received

Example 16-11 trcasst -la Output

************************************************************************* 
    *                        Trace Assistant                                * 
    ************************************************************************* 

Connection ID: 00000B270000000B 
        Socket Id: 15 
        Operation: Receive 
        Multiplex: ON 
        Session Id: 8362785DE4FC0B19E034080020F793E1 
        Connect Data: 
        (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=sales-server)(PORT=1521))
        (CONNECT_DATA=(SERVER=shared)
        (SERVICE_NAME=sales.us.acme.com)(CID=(PROGRAM=)(HOST=sales-server)
        (USER=oracle)))) 
Connection ID: 00000B240000000B 
        Socket Id: 15 
        Operation: Receive 
        Multiplex: ON 
        Session Id: 8362785DE4FB0B19E034080020F793E1 
        Connect Data: 
        (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=sales-server)(PORT=1521))
        (CONNECT_DATA=(SERVER=shared)
        (SERVICE_NAME=sales.us.acme.com)(CID=(PROGRAM=)(HOST=sales-server)
        (USER=oracle)))) 
Connection ID: 00000B1F00000008 
        Socket Id: 15 
        Operation: Receive 
        Multiplex: ON 
        Session Id: 8362785DE4F90B19E034080020F793E1 
        Connect Data: 
        (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=sales-server)(PORT=1521))
        (CONNECT_DATA=(SERVER=shared)
        (SERVICE_NAME=sales.us.acme.com)(CID=(PROGRAM=)(HOST=sales-server)
        (USER=oracle)))) 
    ************************************************************************* 
    *                    Trace Assistant has completed                      * 
    ************************************************************************* 
  

Example 16-12 shows output for connection ID 00000B1F00000008 from the -li 00000B1F00000008 option.

Example 16-12 trcasst -li Output

************************************************************************* 
    *                               Trace Assistant                         * 
    ************************************************************************* 
<--- Received 246 bytes - Connect packet
Current NS version number is: 310.
Lowest NS version number can accommodate is: 300.
Global options for the connection:
        Can receive attention
        No attention processing
        Don't care
        Maximum SDU size: 2048
        Maximum TDU size: 32767
        NT protocol characteristics:
                Test for more data
                Test operation
                Full duplex I/O
                Urgent data support
                Generate SIGURG signal
                Generate SIGPIPE signal
                Generate SIGIO signal
                Handoff connection to another
        Line turnaround value: 0
        Connect data length: 188
        Connect data offset: 58
        Connect data maximum size: 512
                Native Services wanted
                NAU doing O3LOGON - DH key foldedin
                Native Services wanted
                NAU doing O3LOGON - DH key foldedin
        Cross facility item 1: 0
        Cross facility item 2: 0
        Connection id: Ox00000B1F00000008
    (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=sales-server)(PORT=1521))
    (CONNECT_DATA=(SERVER=shared)(SERVICE_NAME=sales.us.acme.com)
    (CID=(PROGRAM=)(HOST=sales-server)(USER=oracle)))) 

---> Send 114 bytes - Accept packet
Accepted NS version number is: 310.
Global options for the connection:
        No attention processing
        Don't care
        Accepted maximum SDU size: 2048
        Accepted maximum TDU size: 32767
        Connect data length: 0
                Native Services wanted
                NAU doing O3LOGON - DH key foldedin
                Native Services wanted
                NAU doing O3LOGON - DH key foldedin
        Connection Time out: 1000
        Tick Size: 100
        Reconnect Data: (ADDRESS=(PROTOCOL=tcp)(HOST=sales-server)(PORT=34454))
        Session Id: 8362785DE4F90B19E034080020F793E1
<--- Received 164 bytes - Data packet
        Native Services negotiation packet version#: 135290880
                 Service data packet #0 for Supervisor has 3 subpackets
                        Subpacket #0:  Version #135290880
                        Subpacket #1: 0000000000000000
                        Subpacket #2: DEADBEEF0003000000040004000100010002
                 Service data packet #1 for Authentication has 3 subpackets
                        Subpacket #0:  Version #135290880
                        Subpacket #1: UB2: 57569
                        Subpacket #2: FCFF
                 Service data packet #2 for Encryption has 2 subpackets
                        Subpacket #0:  Version #135290880
                        Subpacket #1: 0000000000
                 Service data packet #3 for Data Integrity has 2 subpackets
                        Subpacket #0:  Version #135290880
                        Subpacket #1: 0000
---> Send 143 bytes - Data packet
        Native Services negotiation packet version#: 135290880
                 Service data packet #0 for Supervisor has 3 subpackets
                        Subpacket #0:  Version #135290880
                        Subpacket #1: 0000
                        Subpacket #2: DEADBEEF00030000000200040001
                 Service data packet #1 for Authentication has 2 subpackets
                        Subpacket #0:  Version #135290880
                        Subpacket #1: FBFF
                 Service data packet #2 for Encryption has 2 subpackets
                        Subpacket #0:  Version #135290880
                        Subpacket #1: UB1: 0
                 Service data packet #3 for Data Integrity has 2 subpackets
                        Subpacket #0:  Version #135290880
                        Subpacket #1: UB1: 0
<--- Received 48 bytes - Data packet
Set protocol (TTIPRO)
        Operation 01 (con) Receive protocol version=6
        Destination platform: SVR4-be-8.1.0
---> Send 156 bytes - Data packet
Set protocol (TTIPRO)
        Operation 01 (con) Send protocol version=6
        Originating platform: SVR4-be-8.1.0
<--- Received 49 bytes - Data packet
Set datatypes (TTIDTY)
---> Send 38 bytes - Data packet
Set datatypes (TTIDTY)
<--- Received 245 bytes - Data packet
Start of user function (TTIFUN)
        Get the session key (OSESSKEY)
---> Send 161 bytes - Data packet
Return opi parameter (TTIRPA)
... 
    ************************************************************************* 
    *                    Trace Assistant has completed                      * 
    *************************************************************************   

Statistics Example

The type of statistics gathered is approximately on how many TTC calls, packets and bytes were sent and received between the network partners. Example 16-12 shows typical trace file statistics from the -s option.

Example 16-13 trcasst -s Output

************************************************************************* 
    *                               Trace Assistant                         * 
    ************************************************************************* 
---------------------- 
Trace File Statistics: 
---------------------- 
Total number of Sessions: 3 

DATABASE: 
  Operation Count:    0 OPENS,    21 PARSES,    21 EXECUTES,     9 FETCHES 
    Parse Counts: 
       9 PL/SQL,     9 SELECT,      0 INSERT,     0 UPDATE,     0 DELETE, 
       0 LOCK,       3 TRANSACT,    0 DEFINE,     0 SECURE,     0 OTHER 
    Execute counts with SQL data: 
       9 PL/SQL,     0 SELECT,      0 INSERT,     0 UPDATE,     0 DELETE, 
       0 LOCK,       0 TRANSACT,    0 DEFINE,     0 SECURE,     0 OTHER 

  Packet Ratio: 6.142857142857143 packets sent per operation 
  Currently opened Cursors: 0 
  Maximum opened Cursors  : 0 

ORACLE NET SERVICES: 
  Total Calls  :       129 sent,        132 received,          83 oci 
  Total Bytes  :     15796 sent,      13551 received 
    Average Bytes:       122 sent per packet,        102 received per packet 
    Maximum Bytes:      1018 sent,        384 received 

  Grand Total Packets:    129  sent,     132 received 
  
    ************************************************************************* 
    *                    Trace Assistant has completed                      * 
    ************************************************************************* 

Contacting Oracle Support Services

If you are still unable to resolve your problems, or if you are requested to contact Oracle Support Services to report the error, please have the following information at hand: