Go to the first, previous, next, last section, table of contents.


Bitwise Operations on Integers

In a computer, an integer is represented as a binary number, a sequence of bits (digits which are either zero or one). A bitwise operation acts on the individual bits of such a sequence. For example, shifting moves the whole sequence left or right one or more places, reproducing the same pattern "moved over".

The bitwise operations in Emacs Lisp apply only to integers.

Function: lsh integer1 count
lsh, which is an abbreviation for logical shift, shifts the bits in integer1 to the left count places, or to the right if count is negative, bringing zeros into the vacated bits. If count is negative, lsh shifts zeros into the leftmost (most-significant) bit, producing a positive result even if integer1 is negative. Contrast this with ash, below.

Here are two examples of lsh, shifting a pattern of bits one place to the left. We show only the low-order eight bits of the binary pattern; the rest are all zero.

(lsh 5 1)
     => 10
;; Decimal 5 becomes decimal 10.
00000101 => 00001010

(lsh 7 1)
     => 14
;; Decimal 7 becomes decimal 14.
00000111 => 00001110

As the examples illustrate, shifting the pattern of bits one place to the left produces a number that is twice the value of the previous number.

Shifting a pattern of bits two places to the left produces results like this (with 8-bit binary numbers):

(lsh 3 2)
     => 12
;; Decimal 3 becomes decimal 12.
00000011 => 00001100       

On the other hand, shifting one place to the right looks like this:

(lsh 6 -1)
     => 3
;; Decimal 6 becomes decimal 3.
00000110 => 00000011       

(lsh 5 -1)
     => 2
;; Decimal 5 becomes decimal 2.
00000101 => 00000010       

As the example illustrates, shifting one place to the right divides the value of a positive integer by two, rounding downward.

The function lsh, like all Emacs Lisp arithmetic functions, does not check for overflow, so shifting left can discard significant bits and change the sign of the number. For example, left shifting 134,217,727 produces -2 on a 28-bit machine:

(lsh 134217727 1)          ; left shift
     => -2

In binary, in the 28-bit implementation, the argument looks like this:

;; Decimal 134,217,727
0111  1111 1111  1111 1111  1111 1111         

which becomes the following when left shifted:

;; Decimal -2
1111  1111 1111  1111 1111  1111 1110         

Function: ash integer1 count
ash (arithmetic shift) shifts the bits in integer1 to the left count places, or to the right if count is negative.

ash gives the same results as lsh except when integer1 and count are both negative. In that case, ash puts ones in the empty bit positions on the left, while lsh puts zeros in those bit positions.

Thus, with ash, shifting the pattern of bits one place to the right looks like this:

(ash -6 -1) => -3            
;; Decimal -6 becomes decimal -3.
1111  1111 1111  1111 1111  1111 1010
     => 
1111  1111 1111  1111 1111  1111 1101

In contrast, shifting the pattern of bits one place to the right with lsh looks like this:

(lsh -6 -1) => 134217725
;; Decimal -6 becomes decimal 134,217,725.
1111  1111 1111  1111 1111  1111 1010
     => 
0111  1111 1111  1111 1111  1111 1101

Here are other examples:

                   ;               28-bit binary values

(lsh 5 2)          ;   5  =  0000  0000 0000  0000 0000  0000 0101
     => 20         ;      =  0000  0000 0000  0000 0000  0001 0100
(ash 5 2)
     => 20
(lsh -5 2)         ;  -5  =  1111  1111 1111  1111 1111  1111 1011
     => -20        ;      =  1111  1111 1111  1111 1111  1110 1100
(ash -5 2)
     => -20
(lsh 5 -2)         ;   5  =  0000  0000 0000  0000 0000  0000 0101
     => 1          ;      =  0000  0000 0000  0000 0000  0000 0001
(ash 5 -2)
     => 1
(lsh -5 -2)        ;  -5  =  1111  1111 1111  1111 1111  1111 1011
     => 4194302    ;      =  0011  1111 1111  1111 1111  1111 1110
(ash -5 -2)        ;  -5  =  1111  1111 1111  1111 1111  1111 1011
     => -2         ;      =  1111  1111 1111  1111 1111  1111 1110

Function: logand &rest ints-or-markers
This function returns the "logical and" of the arguments: the nth bit is set in the result if, and only if, the nth bit is set in all the arguments. ("Set" means that the value of the bit is 1 rather than 0.)

For example, using 4-bit binary numbers, the "logical and" of 13 and 12 is 12: 1101 combined with 1100 produces 1100. In both the binary numbers, the leftmost two bits are set (i.e., they are 1's), so the leftmost two bits of the returned value are set. However, for the rightmost two bits, each is zero in at least one of the arguments, so the rightmost two bits of the returned value are 0's.

Therefore,

(logand 13 12)
     => 12

If logand is not passed any argument, it returns a value of -1. This number is an identity element for logand because its binary representation consists entirely of ones. If logand is passed just one argument, it returns that argument.

                   ;                28-bit binary values

(logand 14 13)     ; 14  =  0000  0000 0000  0000 0000  0000 1110
                   ; 13  =  0000  0000 0000  0000 0000  0000 1101
     => 12         ; 12  =  0000  0000 0000  0000 0000  0000 1100

(logand 14 13 4)   ; 14  =  0000  0000 0000  0000 0000  0000 1110
                   ; 13  =  0000  0000 0000  0000 0000  0000 1101
                   ;  4  =  0000  0000 0000  0000 0000  0000 0100
     => 4          ;  4  =  0000  0000 0000  0000 0000  0000 0100

(logand)
     => -1         ; -1  =  1111  1111 1111  1111 1111  1111 1111

Function: logior &rest ints-or-markers
This function returns the "inclusive or" of its arguments: the nth bit is set in the result if, and only if, the nth bit is set in at least one of the arguments. If there are no arguments, the result is zero, which is an identity element for this operation. If logior is passed just one argument, it returns that argument.

                   ;               28-bit binary values

(logior 12 5)      ; 12  =  0000  0000 0000  0000 0000  0000 1100
                   ;  5  =  0000  0000 0000  0000 0000  0000 0101
     => 13         ; 13  =  0000  0000 0000  0000 0000  0000 1101

(logior 12 5 7)    ; 12  =  0000  0000 0000  0000 0000  0000 1100
                   ;  5  =  0000  0000 0000  0000 0000  0000 0101
                   ;  7  =  0000  0000 0000  0000 0000  0000 0111
     => 15         ; 15  =  0000  0000 0000  0000 0000  0000 1111

Function: logxor &rest ints-or-markers
This function returns the "exclusive or" of its arguments: the nth bit is set in the result if, and only if, the nth bit is set in an odd number of the arguments. If there are no arguments, the result is 0, which is an identity element for this operation. If logxor is passed just one argument, it returns that argument.

                   ;               28-bit binary values

(logxor 12 5)      ; 12  =  0000  0000 0000  0000 0000  0000 1100
                   ;  5  =  0000  0000 0000  0000 0000  0000 0101
     => 9          ;  9  =  0000  0000 0000  0000 0000  0000 1001

(logxor 12 5 7)    ; 12  =  0000  0000 0000  0000 0000  0000 1100
                   ;  5  =  0000  0000 0000  0000 0000  0000 0101
                   ;  7  =  0000  0000 0000  0000 0000  0000 0111
     => 14         ; 14  =  0000  0000 0000  0000 0000  0000 1110

Function: lognot integer
This function returns the logical complement of its argument: the nth bit is one in the result if, and only if, the nth bit is zero in integer, and vice-versa.

(lognot 5)             
     => -6
;;  5  =  0000  0000 0000  0000 0000  0000 0101
;; becomes
;; -6  =  1111  1111 1111  1111 1111  1111 1010


Go to the first, previous, next, last section, table of contents.