dir
AX25D.CON         284 02-05-99    AXPORTS           216 02-05-99 
BOOT.LOC         1896 02-05-99    ST_YAM.1K2        506 02-05-99 
ST_YAM.9K6        504 02-05-99       
57739264 bytes ledig.

(2) [0/1000kb] C:\LINUX\LC3VAT>type AX25D.CON
type *.*
# /etc/ax25/ax25d.conf
#
# ax25d Configuration File.
#
# AX.25 Ports begin with a '['.
#
[LC3VAT-15 VIA 9K6]
NOCALL   * * * * * *  L
default  * * * * * *  -	root  /usr/sbin/node	node
#
[LC3VAT-14 VIA 9K6]
NOCALL	* * * * * * L
default * * * * * * * root /usr/sbin/axspawn axspawn %u +

(2) [0/1000kb] C:\LINUX\LC3VAT>*** Feil : Filen *.* finnes ikke.

(2) [0/1000kb] C:\LINUX\LC3VAT>type AXPORTS
# /etc/ax25/axports
#
# The format of this file is:
#
# name callsign speed paclen window description
#
#radio	LC3VAT-7	9600	250	4	Radioport 
#baycom	LC3VAT-6	1200	250	4	Baycommodem
9K6	LC3VAT-8	9600	250	7	yamport96 
(1) [0/1000kb] C:\LINUX\LC3VAT>type ST_YAM.1K2 
#! /bin/sh
setserial /dev/cua0 port 0
insmod yam
/usr/sbin/yamcfg yam0 io 0x3f8 irq 4 
/usr/sbin/yamcfg yam0 txdelay 250
/usr/sbin/yamcfg yam0 pers 64 
/usr/sbin/yamcfg yam0 slottime 100 
/usr/sbin/yamcfg yam0 txtail 50 
/usr/sbin/yamcfg yam0 bit 1200
ifconfig yam0 44.141.3.36 netmask 255.255.255.0 hw ax25 LC3VAT-8 up
# resptime 200ms
echo 2 >/proc/sys/net/ax25/yam0/t2_timeout
# maxframe 7
echo 7 >/proc/sys/net/ax25/yam0/standard_window_size
# IP mode VC
echo 1 >/proc/sys/net/ax25/yam0/ip_default_mode
(1) [0/1000kb] C:\LINUX\LC3VAT>type ST_YAM.1K2     9K6
#!/bin/sh
setserial /dev/cua0 port 0
insmod yam
/usr/sbin/yamcfg yam0 io 0x3f8 irq 4 
/usr/sbin/yamcfg yam0 txdelay 60
/usr/sbin/yamcfg yam0 pers 255  
/usr/sbin/yamcfg yam0 slottime 10 
/usr/sbin/yamcfg yam0 txtail 5
/usr/sbin/yamcfg yam0 bit 9600
ifconfig yam0 44.141.3.36 netmask 255.255.255.0 hw ax25 LC3VAT-8 up
# resptime 200ms
echo 2 >/proc/sys/net/ax25/yam0/t2_timeout
# maxframe 7
echo 7 >/proc/sys/net/ax25/yam0/standard_window_size
# IP mode VC
echo 1 >/proc/sys/net/ax25/yam0/ip_default_mode

(1) [0/1000kb] C:\LINUX\LC3VAT>type   BOOT.LOC     
*** Feil : Filen BOOT.LOC finnes ikke.

(1) [0/1000kb] C:\LINUX\LC3VAT>type boot.loc
#! /bin/sh
#
# Filnavn:
# /sbin/init.d/boot.local
#
# Setter hd parameter for EIDE
/sbin/hdparm -c1 /dev/hda
/sbin/hdparm -c1 /dev/hdb
/sbin/hdparm -m10 /dev/hda
/sbin/hdparm -m11 /dev/hdb
#
###########################################################
## Setter opp KISS AX25 device
# /usr/sbin/kissattach -i 44.141.3.36 /dev/ttyS0 radio
# /usr/sbin/kissparms -p radio -t 180 -s 100 -r 128
###########################################################
##
###########################################################
##  Setter opp baycom TCM 3105!                                
#/sbin/setserial /dev/ttyS0 uart none                         
# Installerer HDLC driver og Baycom som modul                 
#/sbin/insmod hdlcdrv
#/sbin/insmod baycom
##  konfigurering av baycomdevicet
#/usr/sbin/sethdlc -p -i bc0 mode "ser12" io 0x3f8 irq 4
#/usr/sbin/sethdlc -i bc0 -a txd 200 slot 100 ppersist 64 half
## OK så fyrer vi opp baycom network device!
#/sbin/ifconfig bc0 hw ax25 LC3VAT-6 up
#####################################################
#
#####################################################
##                                                 
##    YAM modem 1200 eller 9600 på com1            
#
/usr/sbin/startyam1k2
#
#/usr/sbin/startyam9k6
#
#
#####################################################
##
#####################################################
# Setter opp Netrom layer
##/usr/sbin/nrattach -i 44.141.3.36 netrom
##/usr/sbin/nrattach -i 44.141.3.36 netbbs
##/usr/sbin/nrattach -i 44.141.3.36 netdxc
##/usr/sbin/netromd -i
##
#####################################################
##
## deamon for at vi skal akseptere call til oss
/usr/sbin/ax25d
#
## deamon for å håndtere en mh liste klient program : mheard
/usr/sbin/mheardd
## 
## litt beacon må til!
beacon -c LC3VAT-15 -t 60 9k6 'Rolfs LINUX BOX QRV.'
beacon -c LC3VAT-15 -t 60 9k6 '44.141.3.36, WEB NEWS TELNET FTP SMTP'

(2) [1/1000kb] C:\LINUX\LC3VAT>