Skip Headers

Oracle® Call Interface Programmer's Guide
10g Release 1 (10.1)

Part Number B10779-01
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Feedback

Go to previous page
Previous
Go to current chapter
Up
Go to next page
Next
View PDF

OCI Date, Datetime, and Interval Functions

This section describes the OCI Date and Interval functions.

Table 18-5 Date Functions  
Function/Page Purpose

OCIDateAddDays()

Adds or subtracts days

OCIDateAddMonths()

Adds or subtracts months

OCIDateAssign()

Assigns date

OCIDateCheck()

Checks if the given date is valid

OCIDateCompare()

Compares dates

OCIDateDaysBetween()

Gets number of days between two dates

OCIDateFromText()

Converts string to date

OCIDateGetDate()

Gets the date portion of a date

OCIDateGetTime()

Gets the time portion of a date

OCIDateLastDay()

Gets date of last day of month

OCIDateNextDay()

Gets date of next day

OCIDateSetDate()

Sets the date portion of a date

OCIDateSetTime()

Sets the time portion of a date

OCIDateSysDate()

Gets current system date and time

OCIDateToText()

Converts date to string

OCIDateTimeAssign()

Performs datetime assignment

OCIDateTimeCheck()

Checks if the given date is valid

OCIDateTimeCompare()

Compares two datetime values

OCIDateTimeConstruct()

Constructs a datetime descriptor

OCIDateTimeConvert()

Converts one datetime type to another

OCIDateTimeFromArray()

Converts an array of size OCI_DT_ARRAYLEN to an OCIDateTime descriptor

OCIDateTimeFromText()

Converts the given string to Oracle datetime type in the OCIDateTime descriptor, according to the specified format

OCIDateTimeGetDate()

Gets the date (year, month, day) portion of a datetime value

OCIDateTimeGetTime()

Gets the time (hour, min, second, fractional second) out of a datetime value

OCIDateTimeGetTimeZoneName()

Gets the time zone name portion of a datetime value

OCIDateTimeGetTimeZoneOffset()

Gets the time zone (hour, minute) portion of a datetime value

OCIDateTimeIntervalAdd()

Adds an interval to a datetime to produce a resulting datetime

OCIDateTimeIntervalSub()

Subtracts an interval from a datetime and stores the result in a datetime

OCIDateTimeSubtract()

Takes two datetimes as input and stores their difference in an interval

OCIDateTimeSysTimeStamp()

Gets the system current date and time as a timestamp with time zone

OCIDateTimeToArray()

Converts a OCIDateTime descriptor to an array

OCIDateTimeToText()

Converts the given date to a string according to the specified format

OCIDateZoneToZone()

Converts date from one time zone to another zone

OCIIntervalAdd()

Adds two intervals to produce a resulting interval

OCIIntervalAssign()

Copies one interval to another

OCIIntervalCheck()

Checks the validity of an interval

OCIIntervalCompare()

Compares two intervals

OCIIntervalDivide()

Divides an interval by an Oracle NUMBER to produce an interval

OCIIntervalFromNumber()

Converts an Oracle NUMBER to an interval

OCIIntervalFromText()

Given an interval string, returns the interval represented by the string

OCIIntervalFromTZ()

Returns an OCI_DTYPE_INTERVAL_DS.

OCIIntervalGetDaySecond()

Gets values of day, hour, minute, and second from an interval

OCIIntervalGetYearMonth()

Gets year and month from an interval

OCIIntervalMultiply()

Multiplies an interval by an Oracle NUMBER to produce an interval

OCIIntervalSetDaySecond()

Sets day, hour, minute, and second in an interval

OCIIntervalSetYearMonth()

Sets year and month in an interval

OCIIntervalSubtract()

Subtracts two intervals and stores the result in an interval

OCIIntervalToNumber()

Converts an interval to an Oracle NUMBER

OCIIntervalToText()

Given an interval, produces a string representing the interval

90

OCIDateAddDays()

Purpose

Adds or subtracts days from a given date.

Syntax

sword OCIDateAddDays ( OCIError          *err,
                       CONST OCIDate     *date, 
                       sb4               num_days,
                       OCIDate           *result );

Parameters

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

date (IN)

The given date from which to add or subtract.

num_days (IN)

Number of days to be added or subtracted. A negative value is subtracted.

result (IN/OUT)

Result of adding days to, or subtracting days from, date.

Comments

This function returns and error if an invalid date is passed to it.

Related Functions

OCIErrorGet(), OCIDateAddMonths()

OCIDateAddMonths()

Purpose

Adds or subtracts months from a given date.

Syntax

sword OCIDateAddMonths ( OCIError            *err,
                         CONST OCIDate       *date,
                         sb4                 num_months,
                         OCIDate             *result );

Parameters

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

date (IN)

The given date from which to add or subtract.

num_months (IN)

Number of months to be added or subtracted. A negative value is subtracted.

result (IN/OUT)

Result of adding days to, or subtracting days from, date.

Comments

If the input date is the last day of a month, then the appropriate adjustments are made to ensure that the output date is also the last day of the month. For example, Feb. 28 + 1 month = March 31, and November 30 - 3 months = August 31. Otherwise the result date has the same day component as date.

This function returns an error if invalid date is passed to it.

Related Functions

OCIErrorGet(), OCIDateAddDays()

OCIDateAssign()

Purpose

Performs a date assignment.

Syntax

sword OCIDateAssign ( OCIError         *err,
                      CONST OCIDate    *from, 
                      OCIDate          *to );

Parameters

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

from (IN)

Date to be assigned.

to (OUT)

Target of assignment.

Comments

This function assigns a value from one OCIDate variable to another.

Related Functions

OCIErrorGet(), OCIDateCheck()

OCIDateCheck()

Purpose

Checks if the given date is valid.

Syntax

sword OCIDateCheck ( OCIError          *err,
                     CONST OCIDate     *date, 
                     uword             *valid );

Parameters

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

date (IN)

Date to be checked

valid (OUT)

Returns zero for a valid date. Otherwise, the ORed combination of all error bits specified as follows:

Table 18-6 Error Bits  
Macro Name Bit Number Error

OCI_DATE_INVALID_DAY

0x1

Bad day

OCI_DATE_DAY_BELOW_VALID

0x2

Bad day low/high bit (1=low)

OCI_DATE_INVALID_MONTH

0x4

Bad month

OCI_DATE_MONTH_BELOW_VALID

0x8

Bad month low/high bit (1=low)

OCI_DATE_INVALID_YEAR

0x10

Bad year

OCI_DATE_YEAR_BELOW_VALID

0x20

Bad year low/high bit (1=low)

OCI_DATE_INVALID_HOUR

0x40

Bad hour

OCI_DATE_HOUR_BELOW_VALID

0x80

Bad hour low/high bit (1=low)

OCI_DATE_INVALID_MINUTE

0x100

Bad minute

OCI_DATE_MINUTE_BELOW_VALID

0x200

Bad minute low/high bit (1=low)

OCI_DATE_INVALID_SECOND

0x400

Bad second

OCI_DATE_SECOND_BELOW_VALID

0x800

Bad second low/high bit (1=low)

OCI_DATE_DAY_MISSING_FROM_1582

0x1000

Day is one of those missing from 1582

OCI_DATE_YEAR_ZERO

0x2000

Year may not equal zero

OCI_DATE_INVALID_FORMAT

0x8000

Bad date format input

For example, if the date passed in was 2/0/1990 25:61:10 in (month/day/year hours:minutes:seconds format), the error returned would be:

OCI_DATE_INVALID_DAY | OCI_DATE_DAY_BELOW_VALID | OCI_DATE_INVALID_HOUR | 
   OCI_DATE_INVALID_MINUTE.

Comments

This function returns an error if date or valid pointer is NULL.

Related Functions

OCIErrorGet(), OCIDateCompare()

OCIDateCompare()

Purpose

Compares two dates.

Syntax

sword OCIDateCompare ( OCIError           *err, 
                       CONST OCIDate      *date1, 
                       CONST OCIDate      *date2,
                       sword              *result );

Parameters

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

date1, date2 (IN)

Dates to be compared.

result (OUT)

Comparison result:

Table 18-7 Comparison Results  
Comparison result Output in result parameter

date1 < date2

-1

date1 = date2

0

date1 > date2

1

Comments

This function returns and error if an invalid date is passed to it.

Related Functions

OCIErrorGet(), OCIDateCheck()

OCIDateDaysBetween()

Purpose

Gets the number of days between two dates.

Syntax

sword OCIDateDaysBetween ( OCIError            *err, 
                           CONST OCIDate       *date1, 
                           CONST OCIDate       *date2, 
                           sb4                 *num_days );

Parameters

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

date1 (IN)

Input date.

date2 (IN)

Input date.

num_days (OUT)

Number of days between date1 and date2.

Comments

When the number of days between date1 and date2 is computed, the time is ignored.

This function returns an error if invalid date is passed to it.

Related Functions

OCIErrorGet(), OCIDateCheck()

OCIDateFromText()

Purpose

Converts a character string to a date type according to the specified format.

Syntax

sword OCIDateFromText ( OCIError           *err,
                        CONST text         *date_str, 
                        ub4                d_str_length, 
                        CONST text         *fmt,
                        ub1                fmt_length, 
                        CONST text         *lang_name,
                        ub4                lang_length, 
                        OCIDate            *date );

Parameters

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

date_str (IN)

Input string to be converted to Oracle date.

d_str_length (IN)

Size of the input string, if the length is -1 then date_str is treated as a NULL-terminated string.

fmt (IN)

Conversion format. If fmt is a NULL pointer, then the string is expected to be in "DD-MON-YY" format.

fmt_length (IN)

Length of the fmt parameter.

lang_name (IN)

Language in which the names and abbreviations of days and months are specified. If lang_name is a NULL string, (text *)0, then the default language of the session is used.

lang_length (IN)

Length of the lang_name parameter.

date (OUT)

Given string converted to date.

Comments

Refer to the TO_DATE conversion function described in the Oracle Database SQL Reference for a description of format and multilingual arguments.

This function returns an error if it receives an invalid format, language, or input string.

Related Functions

OCIErrorGet(), OCIDateToText()

OCIDateGetDate()

Purpose

Get the year, month, and day stored in an Oracle date.

Syntax

void OCIDateGetDate ( CONST OCIDate    *date,
                      sb2              *year,
                      ub1              *month, 
                      ub1              *day ); 

Parameters

date (IN)

Oracle date whose year, month, day data is retrieved.

year (OUT)

Year value returned.

month (OUT)

Month value returned.

day (OUT)

Day value returned.

Comments

None.

Related Functions

OCIDateSetDate(), OCIDateGetTime()

OCIDateGetTime()

Purpose

Gets the time stored in an Oracle date.

Syntax

void OCIDateGetTime ( CONST OCIDate    *date,
                      ub1              *hour,
                      ub1              *min, 
                      ub1              *sec );

Parameters

date (IN)

Oracle date whose time data is retrieved.

hour (OUT)

Hour value returned.

min (OUT)

Minute value returned.

sec (OUT)

Second value returned.

Comments

Returns the time information returned in the form: hour, minute and seconds.

Related Functions

OCIDateSetTime(), OCIDateGetDate()

OCIDateLastDay()

Purpose

Gets the date of the last day of the month in a specified date.

Syntax

sword OCIDateLastDay ( OCIError            *err,
                       CONST OCIDate       *date,
                       OCIDate             *last_day );

Parameters

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

date (IN)

Input date.

last_day (OUT)

Last day of the month in date.

Comments

This function returns an error if invalid date is passed to it.

Related Functions

OCIErrorGet(), OCIDateGetDate()

OCIDateNextDay()

Purpose

Gets the date of next day of the week, after a given date.

Syntax

sword OCIDateNextDay ( OCIError            *err,
                       CONST OCIDate       *date,
                       CONST OraText       *day, 
                       ub4                 day_length,
                       OCIDate             *next_day );

Parameters

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

date (IN)

Returned date should be later than this date.

day (IN)

First day of week named by this is returned.

day_length (IN)

Length in bytes of string day.

next_day (OUT)

First day of the week named by day later than date.

Comments

Returns the date of the first day of the week named by day that is later than date.

Example

Get the date of the next Monday after April 18, 1996 (a Thursday).

OCIDate one_day, next_day;
/* Add code here to set one_day to be '18-APR-96' */
OCIDateNextDay(err, &one_day, "MONDAY", strlen("MONDAY"), &next_day);

OCIDateNextDay() returns "22-APR-96".

This function returns and error if an invalid date or day is passed to it.

Related Functions

OCIErrorGet(), OCIDateGetDate()

OCIDateSetDate()

Purpose

Set the values in an Oracle date.

Syntax

void OCIDateSetDate ( OCIDate    *date, 
                      sb2        year, 
                      ub1        month, 
                      ub1        day );

Parameters

date (OUT)

Oracle date whose time data is set.

year (IN)

Year value to be set.

month (IN)

Month value to be set.

day (IN)

Day value to be set.

Comments

None.

Related Functions

OCIDateGetDate()

OCIDateSetTime()

Purpose

Sets the time information in an Oracle date.

Syntax

void OCIDateSetTime ( OCIDate    *date,
                      ub1        hour, 
                      ub1        min, 
                      ub1        sec ); 

Parameters

date (OUT)

Oracle date whose time data is set.

hour (IN)

Hour value to be set.

min (IN)

Minute value to be set.

sec (IN)

Second value to be set.

Comments

None.

Related Functions

OCIDateGetTime()

OCIDateSysDate()

Purpose

Gets the current system date and time of the client.

Syntax

sword OCIDateSysDate ( OCIError       *err,
                       OCIDate        *sys_date );

Parameters

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

sys_date (OUT)

Current system date and time of the client.

Comments

None.

Related Functions

OCIErrorGet()

OCIDateToText()

Purpose

Converts a date type to a character string.

Syntax

sword OCIDateToText ( OCIError                  *err, 
                      CONST OCIDate             *date, 
                      CONST OraText             *fmt, 
                      ub1                       fmt_length, 
                      CONST OraText             *lang_name,
                      ub4                       lang_length, 
                      ub4                       *buf_size, 
                      OraText                   *buf );

Parameters

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

date (IN)

Oracle date to be converted.

fmt (IN)

Conversion format, if NULL, (text *)0, then the date is converted to a character string in the default date format, DD-MON-YY.

fmt_length (IN)

Length of the fmt parameter.

lang_name (IN)

Specifies the language in which names and abbreviations of months and days are returned; default language of session is used if lang_name is NULL ((text *)0).

lang_length (IN)

Length of the lang_name parameter.

buf_size (IN/OUT)
buf (OUT)

Buffer into which the converted string is placed.

Comments

Converts the given date to a string according to the specified format. The converted NULL-terminated date string is stored in buf.

Refer to the TO_DATE conversion function described in the Oracle Database SQL Reference for a description of format and multilingual arguments.

This function returns an error if the buffer is too small, or if the function is passed an invalid format or unknown language. Overflow also causes an error. For example, converting a value of 10 into format '9' causes an error.

Related Functions

OCIErrorGet(), OCIDateFromText()

OCIDateTimeAssign()

Purpose

Performs datetime assignment.

Syntax

sword OCIDateTimeAssign ( dvoid               *hndl, 
                          OCIError            *err,
                          CONST OCIDateTime   *from,
                          OCIDateTime         *to );

Parameters

hndl (IN)

The OCI user session handle or environment handle. If a user session handle is passed, the conversion takes place in the session's NLS_LANGUAGE and the session's NLS_CALENDAR, otherwise the default is used.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

from (IN)

Source (rhs) datetime to be assigned.

to (OUT)

Target (lhs) of assignment.

Comments

This function performs an assignment from the from datetime to the to datetime for any of the datetime types listed in the description of the type parameter.

The type of the output is the same as that of the input.

Returns

OCI_SUCCESS,

OCI_ERROR

Related Functions

OCIDateTimeCheck(), OCIDateTimeConstruct()

OCIDateTimeCheck()

Purpose

Checks if the given date is valid.

Syntax

sword OCIDateTimeCheck ( dvoid               *hndl,
                         OCIError            *err, 
                         CONST OCIDateTime   *date, 
                         ub4                 *valid );

Parameters

hndl (IN)

The OCI user session handle or environment handle. If a user session handle is passed, the conversion takes place in the session's NLS_LANGUAGE and the session's NLS_CALENDAR, otherwise the default is used.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

date (IN)

The date to be checked.

valid (OUT)

Returns zero for a valid date, otherwise it returns the ORed combination of all the error bits specified next:

Table 18-8 Error Bits  
Macro Name Bit Number Error

OCI_DT_INVALID_DAY

0x1

Bad day

OCI_DT_DAY_BELOW_VALID

0x2

Bad day low/high bit (1=low)

OCI_DT_INVALID_MONTH

0x4

Bad month

OCI_DT_MONTH_BELOW_VALID

0x8

Bad month low/high bit (1=low)

OCI_DT_INVALID_YEAR

0x10

Bad year

OCI_DT_YEAR_BELOW_VALID

0x20

Bad year low/high bit (1=low)

OCI_DT_INVALID_HOUR

0x40

Bad hour

OCI_DT_HOUR_BELOW_VALID

0x80

Bad hour low/high bit (1=low)

OCI_DT_INVALID_MINUTE

0x100

Bad minute

OCI_DT_MINUTE_BELOW_VALID

0x200

Bad minute low/high bit (1=low)

OCI_DT_INVALID_SECOND

0x400

Bad second

OCI_DT_SECOND_BELOW_VALID

0x800

Bad second low/high bit (1=low)

OCI_DT_DAY_MISSING_FROM_1582

0x1000

Day is one of those missing from 1582

OCI_DT_YEAR_ZERO

0x2000

Year may not equal zero

OCI_DT_INVALID_TIMEZONE

0x4000

Bad time zone

OCI_DT_INVALID_FORMAT

0x8000

Bad date format input

So, for example, if the date passed in was 2/0/1990 25:61:10 in (month/day/year hours:minutes:seconds format), the error returned would be:

 OCI_DT_INVALID_DAY | OCI_DT_DAY_BELOW_VALID | 
     OCI_DT_INVALID_HOUR | OCI_DT_INVALID_MINUTE.

Returns

OCI_SUCCESS,

OCI_INVALID_HANDLE, if err is a NULL pointer,

OCI_ERROR, if date or valid is a NULL pointer.

Related Functions

OCIDateTimeAssign()

OCIDateTimeCompare()

Purpose

Compares two datetime values.

Syntax

sword OCIDateTimeCompare ( dvoid              *hndl,
                           OCIError           *err,
                           CONST OCIDateTime  *date1, 
                           CONST OCIDateTime  *date2,
                           sword              *result );

Parameters

hndl (IN/OUT)

The OCI user session handle or environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

date1, date2 (IN)

Dates to be compared.

result (OUT)

Comparison result:

Table 18-9 Comparison Results  
Comparison result Output in result parameter

date1 < date2

-1

date1 = date2

0

date1 > date2

1

Returns

OCI_SUCCESS,

OCI_INVALID_HANDLE, if err is a NULL pointer,

OCI_ERROR, if an invalid date is used, or if the input date arguments are not of mutually comparable types.

Related Functions

OCIDateTimeConstruct()

OCIDateTimeConstruct()

Purpose

Constructs a datetime descriptor.

Syntax

sword OCIDateTimeConstruct ( dvoid         *hndl,
                             OCIError      *err,
                             OCIDateTime   *datetime,
                             sb2           year,
                             ub1           month,
                             ub1           day,
                             ub1           hour,
                             ub1           min,
                             ub1           sec,
                             ub4           fsec,
                             OraText       *timezone,
                             size_t        timezone_length );

Parameters

hndl (IN)

The OCI user session handle or environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

datetime (IN)

Pointer to an OCIDateTime descriptor.

year (IN)

Year value.

month (IN)

Month value.

day (IN)

Day value.

hour (IN)

Hour value.

min (IN)

Minute value.

sec (IN)

Second value

fsec (IN)

Fractional second value.

timezone (IN)

Time zone string.

timezone_length (IN)

Length of the time zone string.

Comments

The type of the datetime is the type of the OCIDateTime descriptor. Only the relevant fields based on the type are used. For types with time zone, the date and time fields are assumed to be in the local time of the specified time zone.

If time zone is not specified, then session default time zone is assumed.

Returns

OCI_SUCCESS,

OCI_ERROR, if datetime is not valid.

Related Functions

OCIDateTimeAssign(), OCIDateTimeConvert()

OCIDateTimeConvert()

Purpose

Converts one datetime type to another.

Syntax

sword OCIDateTimeConvert ( dvoid        *hndl,
                           OCIError     *err, 
                           OCIDateTime  *indate, 
                           OCIDateTime  *outdate );

Parameters

hndl (IN)

The OCI user session handle or environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

indate (IN)

A pointer to the input date.

outdate (OUT)

A pointer to the output datetime.

Comments

This function converts one datetime type to another. The result type is the type of the outdate descriptor. The session default time zone (ORA_SDTZ) is used when converting a datetime without time zone to one with time zone.

Returns

OCI_SUCCESS,

OCI_INVALID_HANDLE if err is NULL,

OCI_ERROR, if the conversion is not possible with the given input values.

Related Functions

OCIDateTimeCheck()

OCIDateTimeFromArray()

Purpose

Converts an array containing a date to an OCIDateTime descriptor.

Syntax

sword OCIDateTimeFromArray ( dvoid              *hndl,
                             OCIError           *err, 
                             CONST ub1          *inarray,
                             ub4                *len 
                             ub1                type,
                             OCIDateTime        *datetime,
                             CONST OCIInterval  *reftz,
                             ub1                fsprec );

Parameters

hndl (IN)

The OCI user session handle or environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

inarray(IN)

Array of ub1, containing the date.

len (IN)

Length of inarray.

type (IN)

Type of the resulting datetime. The array will be converted to the specific SQLT type.

datetime (OUT)

Pointer to an OCIDateTime descriptor.

reftz (IN)

Descriptor for OCIInterval used as a reference when converting a SQLT_TIMESTAMP_LTZ type.

fsprec (IN)

Fractional second precision of the resulting datetime.

Returns

OCI_SUCCESS,

OCI_ERROR if type is invalid.

Related Functions

OCIDateTimeFromText(),OCIDateTimeToArray().

OCIDateTimeFromText()

Purpose

Converts the given string to Oracle datetime type in the OCIDateTime descriptor, according to the specified format.

Syntax

sword OCIDateTimeFromText ( dvoid              *hndl,
                            OCIError           *err, 
                            CONST OraText      *date_str,
                            size_t             dstr_length,
                            CONST OraText      *fmt,
                            ub1                fmt_length, 
                            CONST OraText      *lang_name,
                            size_t             lang_length, 
                            OCIDateTime        *datetime );

Parameters

hndl (IN)

The OCI user session handle or environment handle. If a user session handle is passed, the conversion takes place in the session's NLS_LANGUAGE and the session's NLS_CALENDAR, otherwise the default is used.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

date_str (IN)

The input string to be converted to an Oracle datetime.

dstr_length (IN)

The size of the input string. If the length is -1 then date_str is treated as a NULL-terminated string.

fmt (IN)

The conversion format. If fmt is a NULL pointer, then the string is expected to be in the default format for the datetime type.

fmt_length (IN)

The length of the fmt parameter.

lang_name (IN)

Specifies the language in which the names and abbreviations of months and days are specified. The default language of the session is used if lang_name is NULL (lang_name = (text *)0).

lang_length (IN)

The length of the lang_name parameter.

datetime (OUT)

The given string converted to a date.

Comments

Refer to the description of the TO_DATE conversion function in the SQL Reference for a description of the format argument.

Returns

OCI_SUCCESS,

OCI_INVALID_HANDLE if err is NULL,

OCI_ERROR, if any of the following is true:

Related Functions

OCIDateTimeToText(), OCIDateTimeFromArray().

OCIDateTimeGetDate()

Purpose

Gets the date (year, month, day) portion of a datetime value.

Syntax

void OCIDateTimeGetDate ( dvoid              *hndl,
                          OCIError           *err, 
                          CONST OCIDateTime  *datetime,
                          sb2                *year, 
                          ub1                *month, 
                          ub1                *day );

Parameters

hndl (IN)

The OCI user session handle or environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

datetime (IN)

Pointer to an OCIDateTime descriptor from which date information is retrieved.

year (OUT)
month (OUT)
day (OUT)

The retrieved year, month, and day values.

Comments

This function gets the date (year, month, day) portion of a datetime value.

Returns

OCI_SUCCESS,

OCI_ERROR if the input type is SQLT_TIME or OCI_TIME_TZ.

Related Functions

OCIDateTimeGetTime()

OCIDateTimeGetTime()

Purpose

Gets the time (hour, min, second, fractional second) out of a datetime value.

Syntax

void OCIDateTimeGetTime ( dvoid         *hndl, 
                          OCIError      *err, 
                          OCIDateTime   *datetime, 
                          ub1           *hour,
                          ub1           *min, 
                          ub1           *sec, 
                          ub4           *fsec );

Parameters

hndl (IN)

The OCI user session handle or environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

datetime (IN)

Pointer to an OCIDateTime descriptor from which time information will be retrieved.

hour (OUT)

The retrieved hour value.

min (OUT)

The retrieved minute value.

sec (OUT)

The retrieved second value.

fsec (OUT)

The retrieved fractional second value.

Comments

This function gets the time portion (hour, min, second, fractional second) out of a given datetime value.

This function returns an error if the given datetime does not contain time information.

Returns

OCI_SUCCESS,

OCI_ERROR if datetime does not contain time (SQLT_DATE).

Related Functions

OCIDateTimeGetDate()

OCIDateTimeGetTimeZoneName()

Purpose

Gets the time zone name portion of a datetime value.

Syntax

void OCIDateTimeGetTimeZoneName ( dvoid              *hndl, 
                                  OCIError           *err, 
                                  CONST OCIDateTime  *datetime, 
                                  ub1                *buf,
                                  ub4                *buflen, );

Parameters

hndl (IN)

The OCI user session handle or environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

datetime (IN)

Pointer to an OCIDateTime descriptor.

buf (OUT)

Buffer to store the retrieved time zone name.

buflen (IN/OUT)

The size of the buffer (IN). The size of the name field (OUT)

Comments

This function gets the time portion (hour, min, second, fractional second) out of a given datetime value.

This function returns an error if the given datetime does not contain time information.

Returns

OCI_SUCCESS,

OCI_ERROR if datetime does not contain time zone (SQLT_DATE, SQLT_TIMESTAMP).

Related Functions

OCIDateTimeGetDate(), OCIDateTimeGetTimeZoneOffset().

OCIDateTimeGetTimeZoneOffset()

Purpose

Gets the time zone (hour, minute) portion of a datetime value.

Syntax

void OCIDateTimeGetTimeZoneOffset ( dvoid              *hndl, 
                                    OCIError           *err, 
                                    CONST OCIDateTime  *datetime, 
                                    sb1                *hour,
                                    sb1                *min, );

Parameters

hndl (IN)

The OCI user session handle or environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

datetime (IN)

Pointer to an OCIDateTime descriptor.

hour (OUT)

The retrieved time zone hour value.

min (OUT)

The retrieved time zone minute value.

Comments

This function gets the time zone hour and the time zone minute portion out of a given datetime value.

This function returns an error if the given datetime does not contain time information.

Returns

OCI_SUCCESS,

OCI_ERROR if datetime does not contain time zone (SQLT_DATE, SQLT_TIMESTAMP).

Related Functions

OCIDateTimeGetDate(), OCIDateTimeGetTimeZoneName().

OCIDateTimeIntervalAdd()

Purpose

Adds an interval to a datetime to produce a resulting datetime.

Syntax

sword OCIDateTimeIntervalAdd ( dvoid        *hndl, 
                               OCIError     *err, 
                               OCIDateTime  *datetime, 
                               OCIInterval  *inter, 
                               OCIDateTime  *outdatetime );

Parameters

hndl (IN)

The user session or environment handle. If a session handle is passed, the addition takes place in the session default calendar.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

datetime (IN)

Pointer to the input datetime.

inter (IN)

Pointer to the input interval.

outdatetime (OUT)

Pointer to the output datetime. The output datetime will be of same type as the input datetime.

Returns

OCI_SUCCESS if the function completes successfully,

OCI_INVALID_HANDLE, if err is a NULL pointer,

OCI_ERROR, if the resulting date is before Jan 1, -4713, or is after Dec 31, 9999.

Related Functions

OCIDateTimeIntervalSub()

OCIDateTimeIntervalSub()

Purpose

Subtracts an interval from a datetime and stores the result in a datetime.

Syntax

sword OCIDateTimeIntervalSub ( dvoid        *hndl,
                               OCIError     *err, 
                               OCIDateTime  *datetime, 
                               OCIInterval  *inter,
                               OCIDateTime  *outdatetime );

Parameters

hndl (IN)

The user session or environment handle. If a session handle is passed, the subtraction takes place in the session default calendar. The interval is assumed to be in the session calendar.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

datetime (IN)

Pointer to the input datetime value.

inter (IN)

Pointer to the input interval.

outdatetime (OUT)

Pointer to the output datetime. The output datetime will be of same type as the input datetime.

Returns

OCI_SUCCESS if the function completes successfully,

OCI_INVALID_HANDLE, if err is a NULL pointer,

OCI_ERROR, if the resulting date is before Jan 1, -4713, or is after Dec 31, 9999.

Related Functions

OCIDateTimeIntervalAdd()

OCIDateTimeSubtract()

Purpose

Takes two datetimes as input and stores their difference in an interval.

Syntax

sword OCIDateTimeSubtract ( dvoid        *hndl, 
                            OCIError     *err,
                            OCIDateTime  *indate1,
                            OCIDateTime  *indate2, 
                            OCIInterval  *inter );

Parameters

hndl (IN)

The OCI user session handle or environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

indate1(IN)

Pointer to the subtrahend.

indate2(IN)

Pointer to the minuend.

inter (OUT)

Pointer to the output interval.

Returns

OCI_SUCCESS if the function completes successfully,

OCI_INVALID_HANDLE if err is NULL pointer,

OCI_ERROR, if the input datetimes are not of comparable types.

Related Functions

OCIDateTimeCompare()

OCIDateTimeSysTimeStamp()

Purpose

Gets the system current date and time as a timestamp with time zone.

Syntax

sword OCIDateTimeSysTimeStamp ( dvoid          *hndl,
                                OCIError       *err, 
                                OCIDateTime    *sys_date );

Parameters

hndl (IN)

The OCI user session handle or environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

sys_date (OUT)

Pointer to the output timestamp.

Returns

OCI_SUCCESS,

OCI_INVALID_HANDLE, if err is a NULL pointer.

Related Functions

OCIDateSysDate()

OCIDateTimeToArray()

Purpose

Converts a OCIDateTime descriptor to an array.

Syntax

sword OCIDateTimeToArray ( dvoid              *hndl,
                           OCIError           *err, 
                           CONST OCIDateTime  *datetime, 
                           CONST OCIInterval  *reftz,
                           ub1                *outarray, 
                           ub4                *len 
                           ub1                fsprec );

Parameters

hndl (IN)

The OCI user session handle or environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

datetime (IN)

Pointer to an OCIDateTime descriptor.

reftz (IN)

Descriptor for the OCIInterval used as a reference when converting SQL_TIMESTAMP_LTZ type.

outarray(OUT)

Array of bytes containing the date.

len (OUT)

Length of outarray.

fsprec (IN)

Fractional second precision in the array.

Comments

The array is allocated by OCI and its length is returned.

Returns

OCI_SUCCESS,

OCI_ERROR if datetime is invalid.

Related Functions

OCIDateTimeToText(), OCIDateTimeFromArray().

OCIDateTimeToText()

Purpose

Converts the given date to a string according to the specified format.

Syntax

sword OCIDateTimeToText ( dvoid               *hndl, 
                          OCIError            *err, 
                          CONST OCIDateTime   *date, 
                          CONST OraText       *fmt,
                          ub1                 fmt_length, 
                          ub1                 fsprec,
                          CONST OraText       *lang_name, 
                          size_t              lang_length, 
                          ub4                 *buf_size, 
                          OraText             *buf );

Parameters

hndl (IN)

The OCI user session handle or environment handle. If a user session handle is passed, the conversion takes place in the session's NLS_LANGUAGE and the session's NLS_CALENDAR, otherwise the default is used.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

date (IN)

Oracle datetime value to be converted

fmt (IN)

The conversion format. If it is a NULL string pointer, (text*)0, then the date is converted to a character string in the default format for that type.

fmt_length (IN)

The length of the fmt parameter.

fsprec (IN)

Specifies the precision in which the fractional seconds is returned.

lang_name (IN)

Specifies the language in which the names and abbreviations of months and days are returned. The default language of the session is used if lang_name is NULL (lang_name = (OraText *)0).

lang_length (IN)

The length of the lang_name parameter.

buf_size (IN/OUT)

The size of the buf buffer (IN).

The size of the resulting string after the conversion (OUT).

buf (OUT)

The buffer into which the converted string is placed.

Comments

Refer to the description of the TO_DATE conversion function in the SQL Reference for a description of format and multilingual arguments. The converted NULL-terminated date string is stored in the buffer buf.

Returns

OCI_SUCCESS,

OCI_INVALID_HANDLE, if err is NULL,

OCI_ERROR, if any of the following is true:

Related Functions

OCIDateTimeFromText()

OCIDateZoneToZone()

Purpose

Converts a date from one time zone to another.

Syntax

sword OCIDateZoneToZone ( OCIError           *err, 
                          CONST OCIDate      *date1, 
                          CONST OraText      *zon1,
                          ub4                zon1_length, 
                          CONST OraText      *zon2, 
                          ub4                zon2_length, 
                          OCIDate            *date2 );

Parameters

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

date1 (IN)

Date to convert.

zon1 (IN)

Zone of input date.

zon1_length (IN)

Length in bytes of zon1.

zon2 (IN)

Zone to be converted to.

zon2_length (IN)

Length in bytes of zon2.

date2 (OUT)

Converted date (in zon2).

Comments

Converts a given date date1 in time zone zon1 to a date date2 in time zone zon2. Works only with North American time zones.

For a list of valid zone strings, refer to the description of the NEW_TIME function in the Oracle Database SQL Reference. Examples of valid zone strings include:

This function returns an error if an invalid date or time zone is passed to it.

Related Functions

OCIErrorGet(), OCIDateCheck()

OCIIntervalAdd()

Purpose

Adds two intervals to produce a resulting interval.

Syntax

sword OCIIntervalAdd ( dvoid        *hndl, 
                       OCIError     *err, 
                       OCIInterval  *addend1, 
                       OCIInterval  *addend2, 
                       OCIInterval  *result );

Parameters

hndl (IN)

The OCI user session handle or the environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

addend1 (IN)

Interval to be added.

addend2 (IN)

Interval to be added.

result (OUT)

The resulting interval (addend1 + addend2).

Returns

OCI_SUCCESS,

OCI_ERROR, if:

OCI_INVALID_HANDLE, if err is a NULL pointer.

Related Functions

OCIIntervalSubtract()

OCIIntervalAssign()

Purpose

Copies one interval to another.

Syntax

void OCIIntervalAssign ( dvoid             *hndl, 
                         OCIError          *err, 
                         CONST OCIInterval *inpinter, 
                         OCIInterval       *outinter );

Parameters

hndl (IN)

The OCI user session handle or the environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

inpinter (IN)

Input interval.

outinter (OUT)

Output interval.

Returns

OCI_SUCCESS,

OCI_INVALID_HANDLE, if err is a NULL pointer.

Related Functions

OCIIntervalCompare()

OCIIntervalCheck()

Purpose

Checks the validity of an interval.

Syntax

sword OCIIntervalCheck ( dvoid              *hndl,
                        OCIError            *err,
                        CONST OCIInterval   *interval,
                        ub4                 *valid );

Parameters

hndl (IN)

The OCI user session handle or the environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

interval (IN)

Interval to be checked.

valid (OUT)

Zero if the interval is valid, else returns an ORed combination of the following codes:

Table 18-10 Error Bits  
Macro Name Bit Number Error

OCI_INTER_INVALID_DAY

0x1

Bad day

OCI_INTER_DAY_BELOW_VALID

0x2

Bad day low/high bit (1=low)

OCI_INTER_INVALID_MONTH

0x4

Bad month

OCI_INTER_MONTH_BELOW_VALID

0x8

Bad month low/high bit (1=low)

OCI_INTER_INVALID_YEAR

0x10

Bad year

OCI_INTER_YEAR_BELOW_VALID

0x20

Bad year low/high bit (1=low)

OCI_INTER_INVALID_HOUR

0x40

Bad hour

OCI_INTER_HOUR_BELOW_VALID

0x80

Bad hour low/high bit (1=low)

OCI_INTER_INVALID_MINUTE

0x100

Bad minute

OCI_INTER_MINUTE_BELOW_VALID

0x200

Bad minute low/high bit (1=low)

OCI_INTER_INVALID_SECOND

0x400

Bad second

OCI_INTER_SECOND_BELOW_VALID

0x800

Bad second low/high bit (1=low)

OCI_INTER_INVALID_FRACSEC

0x1000

Bad fractional second

OCI_INTER_FRACSEC_BELOW_VALID

0x2000

Bad fractional second low/high bit (1=low)

Returns

OCI_SUCCESS,

OCI_INVALID_HANDLE, if err is a NULL pointer,

OCI_ERROR, on error.

Related Functions

OCIIntervalCompare()

OCIIntervalCompare()

Purpose

Compares two intervals.

Syntax

sword OCIIntervalCompare( dvoid         *hndl, 
                          OCIError      *err,
                          OCIInterval   *inter1, 
                          OCIInterval   *inter2, 
                          sword         *result );

Parameters

hndl (IN)

The OCI user session handle or the environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

inter1 (IN)

Interval to be compared.

inter2 (IN)

Interval to be compared.

result (OUT)

Comparison result:

Table 18-11 Comparison Results  
Comparison result Output in result parameter

inter1 < inter2

-1

inter1 = inter2

0

inter1 > inter2

1

Returns

OCI_SUCCESS,

OCI_INVALID_HANDLE, if err is a NULL pointer,

OCI_ERROR, if the input values are not mutually comparable.

Related Functions

OCIIntervalAssign()

OCIIntervalDivide()

Purpose

Divides an interval by an Oracle NUMBER to produce an interval.

Syntax

sword OCIIntervalDivide ( dvoid        *hndl, 
                          OCIError     *err, 
                          OCIInterval  *dividend, 
                          OCINumber    *divisor, 
                          OCIInterval  *result );

Parameters

hndl (IN)

The OCI user session handle or the environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

dividend (IN)

Interval to be divided.

divisor (IN)

Oracle NUMBER dividing dividend.

result (OUT)

The resulting interval ( dividend / divisor).

Returns

OCI_SUCCESS,

OCI_INVALID_HANDLE, if err is a NULL pointer.

Related Functions

OCIIntervalMultiply()

OCIIntervalFromNumber()

Purpose

Converts an Oracle NUMBER to an interval.

Syntax

sword OCIIntervalFromNumber ( dvoid            *hndl, 
                            OCIError           *err,
                            OCIInterval        *interval,
                            OCINumber          *number );

Parameters

hndl (IN)

The OCI user session handle or the environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

interval (OUT)

Interval result.

number (IN)

Oracle NUMBER to be converted (in years for YEAR TO MONTH intervals and in days for DAY TO SECOND intervals).

Returns

OCI_SUCCESS,

OCI_INVALID_HANDLE, if err is a NULL pointer.

Related Functions

OCIIntervalToNumber()

OCIIntervalFromText()

Purpose

Given an interval string, returns the interval represented by the string. The type of the interval is the type of the result descriptor.

Syntax

sword OCIIntervalFromText ( dvoid          *hndl, 
                            OCIError       *err, 
                            CONST OraText  *inpstring,
                            size_t         str_len,
                            OCIInterval    *result );

Parameters

hndl (IN)

The OCI user session handle or the environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

inpstring (IN)

Input string.

str_len (IN)

Length of the input string.

result (OUT)

Resultant interval.

Returns

OCI_SUCCESS,

OCI_INVALID_HANDLE, if err is a NULL pointer,

OCI_ERROR, if any of the following is true:

Related Functions

OCIIntervalToText()

OCIIntervalFromTZ()

Purpose

Returns an OCI_DTYPE_INTERVAL_DS of datatype OCIInterval with the region id set (if the region is specified in the input string) and the current absolute offset, or an absolute offset with the region id set to 0.

Syntax

sword OCIIntervalFromTZ ( dvoid          *hndl, 
                          OCIError       *err, 
                          CONST oratext  *inpstring,
                          size_t         str_len, 
                          OCIInterval    *result ) ;

Parameters

hndl (IN)

The OCI user session handle or the environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

inpstring (IN)

Pointer to the input string.

str_len (IN)

Length of inpstring.

result (OUT)

Output interval.

Returns

OCI_SUCCESS, on success,

OCI_INVALID_HANDLE, if err is NULL,

OCI_ERROR, if there is a bad interval type or time zone errors.

Comments

The input string must be of the form [+/-]TZH:TZM or 'TZR [TZD]'

Related Functions

OCIIntervalFromText()

OCIIntervalGetDaySecond()

Purpose

Gets values of day, hour, minute, and second from an interval.

Syntax

sword OCIIntervalGetDaySecond (dvoid              *hndl, 
                               OCIError           *err, 
                               sb4                *dy, 
                               sb4                *hr,
                               sb4                *mm, 
                               sb4                *ss, 
                               sb4                *fsec, 
                               CONST OCIInterval  *interval );

Parameters

hndl (IN)

The OCI user session handle or the environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

dy (OUT)

Number of days.

hr (OUT)

Number of hours.

mm (OUT)

Number of minutes.

ss (OUT)

Number of seconds.

fsec (OUT)

Number of fractional seconds.

interval (IN)

The input interval.

Returns

OCI_SUCCESS,

OCI_INVALID_HANDLE, if err is a NULL pointer,

Related Functions

OCIIntervalSetDaySecond()

OCIIntervalGetYearMonth()

Purpose

Gets year and month from an interval.

Syntax

sword OCIIntervalGetYearMonth ( dvoid              *hndl, 
                                OCIError           *err, 
                                sb4                *yr,
                                sb4                *mnth,
                                CONST OCIInterval  *interval );

Parameters

hndl (IN)

The OCI user session handle or the environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

yr (OUT)

Year value.

mnth (OUT)

Month value.

interval (IN)

The input interval.

Returns

OCI_SUCCESS,

OCI_INVALID_HANDLE, if err is a NULL pointer.

Related Functions

OCIIntervalSetYearMonth()

OCIIntervalMultiply()

Purpose

Multiplies an interval by an Oracle NUMBER to produce an interval.

Syntax

sword OCIIntervalMultiply ( dvoid              *hndl, 
                            OCIError           *err, 
                            CONST OCIInterval  *inter,
                            OCINumber          *nfactor,
                            OCIInterval        *result );

Parameters

hndl (IN)

The OCI user session handle or the environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

inter (IN)

Interval to be multiplied.

nfactor (IN)

Oracle NUMBER to be multiplied.

result (OUT)

The resulting interval (inter * nfactor).

Returns

OCI_SUCCESS,

OCI_INVALID_HANDLE, if err is a NULL pointer,

OCI_ERROR, if any of the following is true:

Related Functions

OCIIntervalDivide()

OCIIntervalSetDaySecond()

Purpose

Sets day, hour, minute, and second in an interval.

Syntax

sword OCIIntervalSetDaySecond ( dvoid              *hndl, 
                                OCIError           *err, 
                                sb4                dy,
                                sb4                hr,
                                sb4                mm, 
                                sb4                ss, 
                                sb4                fsec, 
                                OCIInterval        *result );

Parameters

hndl (IN)

The OCI user session handle or the environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

dy (IN)

Number of days.

hr (IN)

Number of hours.

mm (IN)

Number of minutes.

ss (IN)

Number of seconds.

fsec (IN)

Number of fractional seconds.

result (OUT)

The resulting interval.

Returns

OCI_SUCCESS,

OCI_INVALID_HANDLE, if err is a NULL pointer,

Related Functions

OCIIntervalGetDaySecond()

OCIIntervalSetYearMonth()

Purpose

Sets year and month in an interval.

Syntax

sword OCIIntervalSetYearMonth ( dvoid              *hndl, 
                                OCIError           *err, 
                                sb4                yr,
                                sb4                mnth,
                                OCIInterval        *result );

Parameters

hndl (IN)

The OCI user session handle or the environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

yr (IN)

Year value.

mnth (IN)

Month value.

result (OUT)

The resulting interval.

Returns

OCI_SUCCESS,

OCI_INVALID_HANDLE, if err is a NULL pointer,

Related Functions

Related Functions

OCIIntervalGetYearMonth()

OCIIntervalSubtract()

Purpose

Subtracts two intervals and stores the result in an interval.

Syntax

sword OCIIntervalSubtract ( dvoid        *hndl,
                            OCIError     *err, 
                            OCIInterval  *minuend, 
                            OCIInterval  *subtrahend,
                            OCIInterval  *result );

Parameters

hndl (IN)

The OCI user session handle or the environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

minuend (IN)

The interval to be subtracted from.

subtrahend (IN)

The interval subtracted from minuend.

result (OUT)

The resulting interval (minuend - subtrahend).

Returns

OCI_SUCCESS,

OCI_INVALID_HANDLE, if err is a NULL pointer,

OCI_ERROR, if any of the following are true:

Related Functions

OCIIntervalAdd()

OCIIntervalToNumber()

Purpose

Converts an interval to an Oracle NUMBER.

Syntax

sword OCIIntervalToNumber ( dvoid              *hndl, 
                            OCIError           *err,
                            OCIInterval        *interval,
                            OCINumber          *number );

Parameters

hndl (IN)

The OCI user session handle or the environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

interval (IN)

Interval to be converted.

number (OUT)

Oracle NUMBER result (in years for YEARMONTH interval and in days for DAYSECOND).

Comments

Fractional portions of the date (for instance, minutes and seconds if the unit chosen is hours) are included in the Oracle NUMBER produced. Excess precision is truncated.

Returns

OCI_SUCCESS,

OCI_INVALID_HANDLE, if err is a NULL pointer.

Related Functions

OCIIntervalFromNumber()

OCIIntervalToText()

Purpose

Given an interval, produces a string representing the interval.

Syntax

sword OCIIntervalToText ( dvoid              *hndl,
                          OCIError           *err,
                          CONST OCIInterval  *interval,
                          ub1                lfprec,
                          ub1                fsprec,
                          OraText            *buffer, 
                          size_t             buflen,
                          size_t             *resultlen );

Parameters

hndl (IN)

The OCI user session handle or the environment handle.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Obtain diagnostic information by calling OCIErrorGet().

interval (IN)

Interval to be converted.

lfprec (IN)

Leading field precision. (The number of digits used to represent the leading field.)

fsprec (IN)

Fractional second precision of the interval (the number of digits used to represent the fractional seconds).

buffer (OUT)

Buffer to hold the result.

buflen (IN)

The length of buffer.

resultlen (OUT)

The length of the result placed into buffer.

Comments

The interval literal is output as 'year' or '[year-]month' for INTERVAL YEAR TO MONTH intervals and as 'seconds' or 'minutes[:seconds]' or 'hours[:minutes[:seconds]]' or 'days[ hours[:minutes[:seconds]]]' for INTERVAL DAY TO SECOND intervals (where optional fields are surrounded by brackets).

Returns

OCI_SUCCESS,

OCI_INVALID_HANDLE, if err is a NULL pointer,

OCI_ERROR, if the buffer is not large enough to hold the result.

Related Functions

OCIIntervalFromText()