Skip Headers

PL/SQL Packages and Types Reference
10g Release 1 (10.1)

Part Number B10802-01
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Feedback

Go to previous page
Previous
Go to next page
Next
View PDF

70
DBMS_REPAIR

The DBMS_REPAIR pacakge contains data corruption repair procedures that enable you to detect and repair corrupt blocks in tables and indexes. You can address corruptions where possible and continue to use objects while you attempt to rebuild or repair them.

See Also:

For detailed information about using the DBMS_REPAIR package, see Oracle Database Administrator's Guide.

This chapter contains the following topics:


Using DBMS_REPAIR


Overview


Note:

The DBMS_REPAIR package is intended for use by database administrators only. It is not intended for use by application developers.



Security Model

The package is owned by SYS. Execution privilege is not granted to other users.


Constants

The DBMS_REPAIR package defines several enumerated constants that should be used for specifying parameter values. Enumerated constants must be prefixed with the package name. For example, DBMS_REPAIR.TABLE_OBJECT.

Table 70-1 lists the parameters and the enumerated constants.

Table 70-1  DBMS_REPAIR Constants
Parameter Constant

object_type

TABLE_OBJECT, INDEX_OBJECT, CLUSTER_OBJECT

action

CREATE_ACTION, DROP_ACTION, PURGE_ACTION

table_type

REPAIR_TABLE, ORPHAN_TABLE

flags

SKIP_FLAG, NOSKIP_FLAG


Note:

The default table_name will be REPAIR_TABLE when table_type is REPAIR_TABLE, and will be ORPHAN_KEY_TABLE when table_type is ORPHAN_TABLE.



Exceptions

Table 70-2  DBMS_REPAIR Exceptions
Exception Description Action

942

Reported by DBMS_REPAIR.ADMIN_TABLES during a DROP_ACTION when the specified table doesn't exist.

-

955

Reported by DBMS_REPAIR. CREATE_ACTION when the specified table already exists.

-

24120

An invalid parameter was passed to the specified DBMS_REPAIR procedure.

Specify a valid parameter value or use the parameter's default.

24122

An incorrect block range was specified.

Specify correct values for the BLOCK_START and BLOCK_END parameters.

24123

An attempt was made to use the specified feature, but the feature is not yet implemented.

Do not attempt to use the feature.

24124

An invalid ACTION parameter was specified.

Specify CREATE_ACTION, PURGE_ACTION or DROP_ACTION for the ACTION parameter.

24125

An attempt was made to fix corrupt blocks on an object that has been dropped or truncated since DBMS_REPAIR.CHECK_OBJECT was run.

Use DBMS_REPAIR.ADMIN_TABLES to purge the repair table and run DBMS_REPAIR.CHECK_OBJECT to determine whether there are any corrupt blocks to be fixed.

24127

TABLESPACE parameter specified with an ACTION other than CREATE_ACTION.

Do not specify TABLESPACE when performing actions other than CREATE_ACTION.

24128

A partition name was specified for an object that is not partitioned.

Specify a partition name only if the object is partitioned.

24129

An attempt was made to pass a table name parameter without the specified prefix.

Pass a valid table name parameter.

24130

An attempt was made to specify a repair or orphan table that does not exist.

Specify a valid table name parameter.

24131

An attempt was made to specify a repair or orphan table that does not have a correct definition.

Specify a table name that refers to a properly created table.

24132

An attempt was made to specify a table name is greater than 30 characters long.

Specify a valid table name parameter.


Examples

/* Fix the bitmap status for all the blocks in table mytab in schema sys */

EXECUTE DBMS_REPAIR.SEGMENT_FIX_STATUS('SYS', 'MYTAB'); 

/* Mark block number 45, filenumber 1 for table mytab in sys schema as FULL.*/ 

EXECUTE DBMS_REPAIR.SEGMENT_FIX_STATUS('SYS', 'MYTAB', TABLE_OBJECT,1, 45, 1); 

Summary of DBMS_REPAIR Subprograms

Table 70-3  DBMS_REPAIR Package Subprograms
Subprogram Description

ADMIN_TABLES Procedure

Provides administrative functions for the DBMS_REPAIR package repair and orphan key tables, including create, purge, and drop functions

CHECK_OBJECT Procedure

Detects and reports corruptions in a table or index

DUMP_ORPHAN_KEYS Procedure

Reports on index entries that point to rows in corrupt data blocks

FIX_CORRUPT_BLOCKS Procedure

Marks blocks software corrupt that have been previously detected as corrupt by CHECK_OBJECT

REBUILD_FREELISTS Procedure

Rebuilds an object's freelists

SEGMENT_FIX_STATUS Procedure

Fixes the corrupted state of a bitmap entry

SKIP_CORRUPT_BLOCKS Procedure

Sets whether to ignore blocks marked corrupt during table and index scans or to report ORA-1578 when blocks marked corrupt are encountered


ADMIN_TABLES Procedure

This procedure provides administrative functions for the DBMS_REPAIR package repair and orphan key tables.

Syntax

DBMS_REPAIR.ADMIN_TABLES (
   table_name  IN   VARCHAR2,
   table_type  IN   BINARY_INTEGER,
   action      IN   BINARY_INTEGER,
   tablespace  IN   VARCHAR2  DEFAULT NULL);

Parameters

Table 70-4  ADMIN_TABLES Procedure Parameters
Parameter Description

table_name

Name of the table to be processed. Defaults to ORPHAN_KEY_TABLE or REPAIR_TABLE based on the specified table_type. When specified, the table name must have the appropriate prefix: ORPHAN_ or REPAIR_.

table_type

Type of table; must be either ORPHAN_TABLE or REPAIR_TABLE.

See "Constants".

action

Indicates what administrative action to perform.

Must be either CREATE_ACTION, PURGE_ACTION, or DROP_ACTION. If the table already exists, and if CREATE_ACTION is specified, then an error is returned. PURGE_ACTION indicates to delete all rows in the table that are associated with non-existent objects. If the table does not exist, and if DROP_ACTION is specified, then an error is returned.

When CREATE_ACTION and DROP_ACTION are specified, an associated view named DBA_<table_name> is created and dropped respectively. The view is defined so that rows associated with non-existent objects are eliminated.

Created in the SYS schema.

See "Constants".

tablespace

Indicates the tablespace to use when creating a table.

By default, the SYS default tablespace is used. An error is returned if the tablespace is specified and if the action is not CREATE_ACTION.


CHECK_OBJECT Procedure

This procedure checks the specified objects and populates the repair table with information about corruptions and repair directives.

Validation consists of block checking all blocks in the object.

Syntax

DBMS_REPAIR.CHECK_OBJECT (
   schema_name       IN  VARCHAR2,
   object_name       IN  VARCHAR2,
   partition_name    IN  VARCHAR2       DEFAULT NULL,
   object_type       IN  BINARY_INTEGER DEFAULT TABLE_OBJECT,
   repair_table_name IN  VARCHAR2       DEFAULT 'REPAIR_TABLE',
   flags             IN  BINARY_INTEGER DEFAULT NULL,
   relative_fno      IN  BINARY_INTEGER DEFAULT NULL,
   block_start       IN  BINARY_INTEGER DEFAULT NULL,
   block_end         IN  BINARY_INTEGER DEFAULT NULL,
   corrupt_count     OUT BINARY_INTEGER);

Parameters

Table 70-5  CHECK_OBJECT Procedure Parameters
Parameter Description

schema_name

Schema name of the object to be checked.

object_name

Name of the table or index to be checked.

partition_name

Partition or subpartition name to be checked.

If this is a partitioned object, and if partition_name is not specified, then all partitions and subpartitions are checked. If this is a partitioned object, and if the specified partition contains subpartitions, then all subpartitions are checked.

object_type

Type of the object to be processed. This must be either TABLE_OBJECT (default) or INDEX_OBJECT.

See "Constants".

repair_table_name

Name of the repair table to be populated.

The table must exist in the SYS schema. Use the admin_tables procedure to create a repair table. The default name is REPAIR_TABLE.

flags

Reserved for future use.

relative_fno

Relative file number: Used when specifying a block range.

block_start

First block to process if specifying a block range. May be specified only if the object is a single table, partition, or subpartition.

block_end

Last block to process if specifying a block range. May be specified only if the object is a single table, partition, or subpartition. If only one of block_start or block_end is specified, then the other defaults to the first or last block in the file respectively.

corrupt_count

Number of corruptions reported.

Usage Notes

You may optionally specify a DBA range, partition name, or subpartition name when you want to check a portion of an object.


DUMP_ORPHAN_KEYS Procedure

This procedure reports on index entries that point to rows in corrupt data blocks. For each such index entry encountered, a row is inserted into the specified orphan table.

If the repair table is specified, then any corrupt blocks associated with the base table are handled in addition to all data blocks that are marked software corrupt. Otherwise, only blocks that are marked corrupt are handled.

This information may be useful for rebuilding lost rows in the table and for diagnostic purposes.

Syntax

DBMS_REPAIR.DUMP_ORPHAN_KEYS (
   schema_name       IN  VARCHAR2,
   object_name       IN  VARCHAR2,
   partition_name    IN  VARCHAR2       DEFAULT NULL,
   object_type       IN  BINARY_INTEGER DEFAULT INDEX_OBJECT,
   repair_table_name IN  VARCHAR2       DEFAULT 'REPAIR_TABLE',
   orphan_table_name IN  VARCHAR2       DEFAULT 'ORPHAN_KEYS_TABLE',
   flags             IN  BINARY_INTEGER DEFAULT NULL,
   key_count         OUT BINARY_INTEGER);

Parameters

Table 70-6  DUMP_ORPHAN_KEYS Procedure Parameters
Parameter Description

schema_name

Schema name.

object_name

Object name.

partition_name

Partition or subpartition name to be processed.

If this is a partitioned object, and if partition_name is not specified, then all partitions and subpartitions are processed. If this is a partitioned object, and if the specified partition contains subpartitions, then all subpartitions are processed.

object_type

Type of the object to be processed. The default is INDEX_OBJECT

See "Constants".

repair_table_name

Name of the repair table that has information regarding corrupt blocks in the base table.

The specified table must exist in the SYS schema. The admin_tables procedure is used to create the table.

orphan_table_name

Name of the orphan key table to populate with information regarding each index entry that refers to a row in a corrupt data block.

The specified table must exist in the SYS schema. The admin_tables procedure is used to create the table.

flags

Reserved for future use.

key_count

Number of index entries processed.


FIX_CORRUPT_BLOCKS Procedure

This procedure fixes the corrupt blocks in specified objects based on information in the repair table that was previously generated by the check_object procedure.

Prior to effecting any change to a block, the block is checked to ensure the block is still corrupt. Corrupt blocks are repaired by marking the block software corrupt. When a repair is effected, the associated row in the repair table is updated with a fix timestamp.

Syntax

DBMS_REPAIR.FIX_CORRUPT_BLOCKS (
   schema_name       IN  VARCHAR2,
   object_name       IN  VARCHAR2,
   partition_name    IN  VARCHAR2       DEFAULT NULL, 
   object_type       IN  BINARY_INTEGER DEFAULT TABLE_OBJECT,
   repair_table_name IN  VARCHAR2       DEFAULT 'REPAIR_TABLE',
   flags             IN  BINARY_INTEGER DEFAULT NULL,
   fix_count         OUT BINARY_INTEGER);

Parameters

Table 70-7  FIX_CORRUPT_BLOCKS Procedure Parameters
Parameter Description

schema_name

Schema name.

object_name

Name of the object with corrupt blocks to be fixed.

partition_name

Partition or subpartition name to be processed.

If this is a partitioned object, and if partition_name is not specified, then all partitions and subpartitions are processed. If this is a partitioned object, and if the specified partition contains subpartitions, then all subpartitions are processed.

object_type

Type of the object to be processed. This must be either TABLE_OBJECT (default) or INDEX_OBJECT.

See "Constants".

repair_table_name

Name of the repair table with the repair directives.

Must exist in the SYS schema.

flags

Reserved for future use.

fix_count

Number of blocks fixed.


REBUILD_FREELISTS Procedure

This procedure rebuilds the freelists for the specified object. All free blocks are placed on the master freelist. All other freelists are zeroed.

If the object has multiple freelist groups, then the free blocks are distributed among all freelists, allocating to the different groups in round-robin fashion.

Syntax

DBMS_REPAIR.REBUILD_FREELISTS (
   schema_name    IN VARCHAR2,   
   object_name    IN  VARCHAR2,
   partition_name IN VARCHAR2 DEFAULT NULL,
   object_type    IN BINARY_INTEGER DEFAULT TABLE_OBJECT);

Parameters

Table 70-8  REBUILD_FREELISTS Procedure Parameters
Parameter Description

schema_name

Schema name.

object_name

Name of the object whose freelists are to be rebuilt.

partition_name

Partition or subpartition name whose freelists are to be rebuilt.

If this is a partitioned object, and partition_name is not specified, then all partitions and subpartitions are processed. If this is a partitioned object, and the specified partition contains subpartitions, then all subpartitions are processed.

object_type

Type of the object to be processed. This must be either TABLE_OBJECT (default) or INDEX_OBJECT.

See"Constants".


SEGMENT_FIX_STATUS Procedure

With this procedure you can fix the corrupted state of a bitmap entry. The procedure either recalculates the state based on the current contents of the corresponding block or sets the state to a specific value.

Syntax

DBMS_REPAIR.SEGMENT_FIX_STATUS (
   segment_owner   IN VARCHAR2,
   segment_name    IN VARCHAR2,
   segment_type    IN BINARY_INTEGER DEFAULT TABLE_OBJECT,
   file_number     IN BINARY_INTEGER DEFAULT NULL,
   block_number    IN BINARY_INTEGER DEFAULT NULL,
   status_value    IN BINARY_INTEGER DEFAULT NULL,
   partition_name  IN VARCHAR2 DEFAULT NULL,);

Parameters

Table 70-9  SEGMENT_FIX_STATUS Procedure Parameters
Parameter Description

schema_owner

Schema name of the segment.

segment_name

Segment name.

partition_name

Optional. Name of an individual partition. NULL for nonpartitioned objects. Default is NULL.

segment_type

Optional Type of the segment (for example, TABLE_OBJECT or INDEX-OBJECT). Default is NULL.

file_number

(optional) The tablespace-relative file number of the data block whose status has to be fixed. If omitted, all the blocks in the segment will be checked for state correctness and fixed.

block_number

(optional) The file-relative block number of the data block whose status has to be fixed. If omitted, all the blocks in the segment will be checked for state correctness and fixed.

status_value

(optional) The value to which the block status described by the file_number and block_number will be set. If omitted, the status will be set based on the current state of the block. This is almost always the case, but if there is a bug in the calculation algorithm, the value can be set manually. Status values:

  • 1 = block is full
  • 2 = block is 0-25% free
  • 3 = block is 25-50% free
  • 4 = block is 50-75% free
  • 5 = block is 75-100% free

The status for bitmap blocks, segment headers, and extent map blocks cannot be altered. The status for blocks in a fixed hash area cannot be altered. For index blocks, there are only two possible states: 1 = block is full and 3 = block has free space.


SKIP_CORRUPT_BLOCKS Procedure

This procedure enables or disables the skipping of corrupt blocks during index and table scans of the specified object.

When the object is a table, skip applies to the table and its indexes. When the object is a cluster, it applies to all of the tables in the cluster, and their respective indexes.


Note:

When Oracle performs an index range scan on a corrupt index after DBMS_REPAIR.SKIP_CORRUPT_BLOCKS has been set for the base table, corrupt branch blocks and root blocks are not skipped. Only corrupt non-root leaf blocks are skipped.


Syntax

DBMS_REPAIR.SKIP_CORRUPT_BLOCKS (
   schema_name  IN VARCHAR2,
   object_name  IN VARCHAR2,
   object_type  IN BINARY_INTEGER DEFAULT TABLE_OBJECT,
   flags        IN BINARY_INTEGER DEFAULT SKIP_FLAG);

Parameters

Table 70-10  SKIP_CORRUPT_BLOCKS Procedure Parameters
Parameter Description

schema_name

Schema name of the object to be processed.

object_name

Name of the object.

object_type

Type of the object to be processed. This must be either TABLE_OBJECT (default) or CLUSTER_OBJECT.

See "Constants".

flags

If SKIP_FLAG is specified, then it turns on the skip of software corrupt blocks for the object during index and table scans. If NOSKIP_FLAG is specified, then scans that encounter software corrupt blocks return an ORA-1578.

See"Constants".