"Linux Gazette...making Linux just a little more fun!"

The Answer Guy

By James T. Dennis, answerguy@ssc.com
Starshine Technical Services, http://www.starshine.org/

Installed on a Secondary SCSI HD: Lilo Stops at LI

From Rick V Smith on 9 Jun 1998

I have installed linux on my second scsi drive the swap on a small partition on my first scsi. and lilo on a big mbr for my win 95. the start of linux went well but when I shut down and went to restart all that happens is Li and the system hang's

Any Idea's.
Thank's Rick

I don't know what you mean by "and like on a big mbr" --- all MBR's (master boot records) are the same size on PC's --- one sector!

It sounds like your BIOS can't "see" the 2nd SCSI drive -- so Lilo can't "see" it either. The easiest solution would be to install LOADLIN into a DOS/Win '96 directory --- with a copy of your kernel(s). The kernel doesn't rely on the BIOS to access your drives (since it provide 32 bit native drivers for your SCSI card --- etc) so it will find its root filesystem with no problem.

Another think to try is to add the "linear" switch to your /etc/lilo.conf --- and then rebuild the boot block and boot map using the /sbin/lilo command. Read the lilo man pages and/or look at the lilo "user" and "tech" .dvi files using xdvi (under X Windows) for details.

There may be other settings that you'll have to tweak to get it working. This is particularly true if you have a large SCSI drive (my guess is that your second drive is bigger than 2 Gb -- and your first one isn't). Look in the CMOS/Setup settings (or whatever your SCSI card provides) for things that suggest that it is doing something "fun" to make the large drive "DOS compatible").

Jim,

I found the following line you wrote in a responce to someone else and this cured my hair loss problem, that probably worked better than Rogain. Thank's for the time and insight.
Rick

# The stanza for booting Linux.
image = /vmlinuz                       # The kernel is in /vmlinuz
label = linux                          # Give it the name "linux"
root = /dev/hda2                       # Use /dev/hda2 as the root
filesystem
vga = ask                              # Prompt for VGA mode
append = "aha152x=0x340,11,7,1"
                                       # Add this to the boot options,
                                       # for detecting the SCSI controller

Copyright © 1998, James T. Dennis
Published in Linux Gazette Issue 30 July 1998

	SCOkeys	chroot	dosemu-db	NTauth	cdr	3270	comport
	lilostop	emulate	ppadrivers	database	vacation	nullmodem	lockups
	gzipC	newlook	c500	solprint	vc1shell	memleak	tvcard