|
|
The QFile class is an I/O device that operates on files. More...
#include <qfile.h>
Inherits QIODevice.
QFile is an I/O device for reading and writing binary and text files. A QFile may be used by itself (readBlock and writeBlock) or by more conveniently using QDataStream or QTextStream.
Here is a code fragment that uses QTextStream to read a text file line by line. It prints each line with a line number.
QFile f("file.txt");
if ( f.open(IO_ReadOnly) ) { // file opened successfully
QTextStream t( &f ); // use a text stream
QString s;
int n = 1;
while ( !t.eof() ) { // until end of file...
s = t.readLine(); // line of text excluding '\n'
printf( "%3d: %s\n", n++, (const char *)s );
}
f.close();
}
The QFileInfo class holds detailed information about a file, such as access permissions, file dates and file types.
The QDir class manages directories and lists of file names.
See also QDataStream and QTextStream.
Constructs a QFile with no name.
Constructs a QFile with a file name name.
See also setName().
Destructs a QFile. Calls close().
[virtual]Sets the file index to pos. Returns TRUE if successful, otherwise FALSE.
Example:
QFile f( "data.bin" );
f.open( IO_ReadOnly ); // index set to 0
f.at( 100 ); // set index to 100
f.at( f.at()+50 ); // set index to 150
f.at( f.size()-80 ); // set index to 80 before EOF
f.close();
Warning: The result is undefined if the file was opened
using the IO_Append specifier.
Reimplemented from QIODevice.
[virtual]Returns the file index.
See also size().
Reimplemented from QIODevice.
[virtual]Returns TRUE if the end of file has been reached, otherwise FALSE.
See also size().
Reimplemented from QIODevice.
[virtual]Closes an open file.
The file is not closed if it was opened with an existing file handle.
If the existing file handle is a FILE*, the file is flushed.
If the existing file handle is an int file descriptor, nothing
is done to the file.
Some "write-behind" filesystems may report an unspecified error on closing the file. These errors only indicate that something may have gone wrong since the previous open(). In such a case status() reports IO_UnspecifiedError after close(), otherwise IO_Ok.
Reimplemented from QIODevice.
[static]This does the reverse of QFile::encodeName().
See also setDecodingFunction().
[static]When you use QFile, QFileInfo, and QDir to access the filesystem with Qt, you can use Unicode filenames. On Unix, these filenames are converted to an 8-bit encoding. If you want to do your own file I/O on Unix, you should convert the filename using this function. On Windows NT, Unicode filenames are supported directly in the filesystem and this function should be avoided. On Windows 95, non-Latin1 locales are not supported at this time.
By default, this function converts to the local 8-bit encoding determined by the user's locale. This is sufficient for filenames that the user chooses. Filenames hard-coded into the application should only use 7-bit ASCII filename characters.
The conversion scheme can be changed using setEncodingFunction(). This might be useful if you wish to give the user an option to store in filenames in UTF-8, etc., but beware that such filenames would probably then be unrecognizable when seen by other programs.
See also decodeName().
Returns TRUE if this file exists, otherwise FALSE.
See also name().
[static]Returns TRUE if the file given by fileName exists, otherwise FALSE.
[virtual]Flushes the file buffer to the disk.
close() also flushes the file buffer.
Reimplemented from QIODevice.
[virtual]Reads a single byte/character from the file.
Returns the byte/character read, or -1 if the end of the file has been reached.
See also putch() and ungetch().
Reimplemented from QIODevice.
Returns the file handle of the file.
This is a small positive integer, suitable for use with C library functions such as fdopen() and fcntl(), as well as with QSocketNotifier.
If the file is not open or there is an error, handle() returns -1.
See also QSocketNotifier.
Returns the name set by setName().
See also setName() and QFileInfo::fileName().
[virtual]Opens the file specified by the file name currently set, using the mode m. Returns TRUE if successful, otherwise FALSE.
The mode parameter m must be a combination of the following flags:
IO_Raw specified raw (non-buffered) file access.
IO_ReadOnly opens the file in read-only mode.
IO_WriteOnly opens the file in write-only mode (and truncates).
IO_ReadWrite opens the file in read/write mode, equivalent to
(IO_ReadOnly|IO_WriteOnly).
IO_Append opens the file in append mode. This mode is very useful
when you want to write something to a log file. The file index is set to
the end of the file. Note that the result is undefined if you position the
file index manually using at() in append mode.
IO_Truncate truncates the file.
IO_Translate enables carriage returns and linefeed translation
for text files under MS-DOS, Windows and OS/2.
The raw access mode is best when I/O is block-operated using 4kB block size or greater. Buffered access works better when reading small portions of data at a time.
Important: When working with buffered files, data may not be written to the file at once. Call flush to make sure the data is really written.
Warning: We have experienced problems with some C libraries when a buffered file is opened for both reading and writing. If a read operation takes place immediately after a write operation, the read buffer contains garbage data. Worse, the same garbage is written to the file. Calling flush() before readBlock() solved this problem.
If the file does not exist and IO_WriteOnly or IO_ReadWrite is
specified, it is created.
Example:
QFile f1( "/tmp/data.bin" );
QFile f2( "readme.txt" );
f1.open( IO_Raw | IO_ReadWrite | IO_Append );
f2.open( IO_ReadOnly | IO_Translate );
See also name(), close(), isOpen() and flush().
Reimplemented from QIODevice.
Opens a file in the mode m using an existing file handle f. Returns TRUE if successful, otherwise FALSE.
Example:
#include <stdio.h>
void printError( const char* msg )
{
QFile f;
f.open( IO_WriteOnly, stderr );
f.writeBlock( msg, qstrlen(msg) ); // write to stderr
f.close();
}
When a QFile is opened using this function, close() does not actually close the file, only flushes it.
Warning: If f is stdin, stdout, stderr, you may not
be able to seek. See QIODevice::isSequentialAccess() for more
information.
See also close().
Opens a file in the mode m using an existing file descriptor f. Returns TRUE if successful, otherwise FALSE.
When a QFile is opened using this function, close() does not actually close the file.
Warning: If f is one of 0 (stdin), 1 (stdout) or 2 (stderr), you may not
be able to seek. size() is set to INT_MAX (in limits.h).
See also close().
[virtual]Writes the character ch to the file.
Returns ch, or -1 if some error occurred.
See also getch() and ungetch().
Reimplemented from QIODevice.
[virtual]Reads at most len bytes from the file into p and returns the number of bytes actually read.
Returns -1 if a serious error occurred.
Warning: We have experienced problems with some C libraries when a buffered file is opened for both reading and writing. If a read operation takes place immediately after a write operation, the read buffer contains garbage data. Worse, the same garbage is written to the file. Calling flush() before readBlock() solved this problem.
See also writeBlock().
Reimplemented from QIODevice.
Reads a line of text.
Reads bytes from the file until end-of-line is reached, or up to maxlen bytes, and returns the number of bytes read, or -1 in case of error. The terminating newline is not stripped.
This function is efficient only for buffered files. Avoid
readLine() for files that have been opened with the IO_Raw
flag.
Note that the string is read as plain Latin1 bytes, not Unicode.
See also readBlock() and QTextStream::readLine().
[virtual]Reads a line of text.
Reads bytes from the file until end-of-line is reached, or up to maxlen bytes, and returns the number of bytes read, or -1 in case of error. The terminating newline is not stripped.
This function is efficient only for buffered files. Avoid
readLine() for files that have been opened with the IO_Raw
flag.
See also readBlock() and QTextStream::readLine().
Reimplemented from QIODevice.
Removes the file specified by the file name currently set. Returns TRUE if successful, otherwise FALSE.
The file is closed before it is removed.
[static]Removes the file fileName. Returns TRUE if successful, otherwise FALSE.
[static]Sets the function for decoding 8-bit filenames. The default uses the locale-specific 8-bit encoding.
See also encodeName() and decodeName().
[static]Sets the function for encoding Unicode filenames. The default encodes in the locale-specific 8-bit encoding.
See also encodeName().
Sets the name of the file. The name can include an absolute directory path or it can be a name or a path relative to the current directory.
Do not call this function if the file has already been opened.
Note that if the name is relative QFile does not associate it with the current directory. If you change directory before calling open(), open uses the new current directory.
Example:
QFile f;
QDir::setCurrent( "/tmp" );
f.setName( "readme.txt" );
QDir::setCurrent( "/home" );
f.open( IO_ReadOnly ); // opens "/home/readme.txt" under UNIX
Also note that the directory separator '/' works for all operating systems supported by Qt.
See also name(), QFileInfo and QDir.
[virtual]Returns the file size.
See also at().
Reimplemented from QIODevice.
[virtual]Puts the character ch back into the file and decrements the index if it is not zero.
This function is normally called to "undo" a getch() operation.
Returns ch, or -1 if some error occurred.
Reimplemented from QIODevice.
Reimplemented for internal reasons; the API is not affected.
[virtual]Reimplemented for internal reasons; the API is not affected.
Writes len bytes from p to the file and returns the number of bytes actually written.
Returns -1 if a serious error occurred.
Warning: When working with buffered files, data may not be written to the file at once. Call flush() to make sure the data is really written.
See also readBlock().
Reimplemented from QIODevice.
Search the documentation, FAQ, qt-interest archive and more (uses
www.trolltech.com):
This file is part of the Qt toolkit, copyright © 1995-2000 Trolltech, all rights reserved.
| Copyright İ 2000 Trolltech | Trademarks | Qt version 2.2.1
|