|
|
Provides feedback on the progress of a slow operation. More...
#include <qprogressdialog.h>
Inherits QSemiModal.
| Type | Name | READ | WRITE | Options |
|---|---|---|---|---|
| bool | wasCancelled | wasCancelled | ||
| int | totalSteps | totalSteps | setTotalSteps | |
| int | progress | progress | setProgress | |
| bool | autoReset | autoReset | setAutoReset | |
| bool | autoClose | autoClose | setAutoClose | |
| QString | labelText | labelText | setLabelText |
A progress dialog is used to give the user an indication of how long an operation is going to take to perform, and to reassure them that the application has not frozen. It also gives the user an opportunity to abort the operation.
A potential problem with progress dialogs is that it is difficult to know when to use them, as operations take different amounts of time on different computer hardware. QProgressDialog offers a solution to this problem: it estimates the time the operation will take (based on time for steps), and only shows itself if that estimate is beyond minimumDuration() (4 seconds by default).
Use setTotalSteps() (or the constructor) to set the number of "steps" in the operation and call setProgress() as the operation progresses. The step value can be chosen arbitrarily. It can be eg. the number of files copied, the number of bytes received, or the number of iterations through the main loop of your algorithm. You must call setProgress() with parameter 0 initially, and with parameter totalSteps() at the end.
The dialog will automatically be reset and hidden at the end of the operation, Use setAutoReset() and setAutoClose() to change this behavior.
There are two ways of using QProgressDialog, modal and non-modal.
Using a modal QProgressDialog is simpler for the programmer, but you have to call qApp->processEvents() to keep the event loop running and prevent the application from freezing. Do the operation in a loop, calling setProgress() at intervals, and checking for cancellation with wasCancelled().
Example:
QProgressDialog progress( "Copying files...", "Abort Copy", numFiles,
this, "progress", TRUE );
for (int i=0; i<numFiles; i++) {
progress.setProgress( i );
qApp->processEvents();
if ( progress.wasCancelled() )
break;
... // copy one file
}
progress.setProgress( numFiles );
A non-modal progress dialog is suitable for operations that take place in the background, where the user is able to interact with the application. Such operations are typically based on QTimer (or QObject::timerEvent()), QSocketNotifier, or QUrlOperator; or performed in a separate thread. A QProgressBar in the status bar of your main window is often an alternative to a non-modal progress dialog.
You need an event loop to be running. Connect the cancelled() signal to a slot that stops the operation, and call setProgress() at intervals.
Example:
Operation::Operation( QObject *parent = 0 )
: QObject( parent ), steps(0)
{
pd = new QProgressDialog( "Operation in progress.", "Cancel", 100 );
connect( pd, SIGNAL(cancelled()), this, SLOT(cancel()) );
t = new QTimer( this );
connect( t, SIGNAL(timeout()), this, SLOT(perform()) );
t->start(0);
}
void Operation::perform()
{
pd->setProgress( steps );
... //perform one percent of the operation
steps++;
if ( steps > pd->totalSteps() )
t->stop();
}
void Operation::cancel()
{
t->stop();
... //cleanup
}
In both modes, the progress dialog may be customized by replacing the child widgets with custom widgets, using setLabel(), setBar() and setCancelButton(). The functions setLabelText() and setCancelButtonText() sets the texts shown.
See also QDialog, QProgressBar and GUI Design Handbook: Progress Indicator
Examples: progress/progress.cpp
Constructs a progress dialog.
Default settings:
parent, name, modal, and f are sent to the QSemiModal::QSemiModal() constructor. Note that if modal is FALSE (the default), you will need to have an event loop proceeding for any redrawing of the dialog to occur. If it is TRUE, the dialog ensures events are processed when needed.
See also setLabelText(), setLabel(), setCancelButtonText(), setCancelButton() and setTotalSteps().
Constructs a progress dialog.
labelText is text telling the user what is progressing.
cancelButtonText is the text on the cancel button, or 0 if no cancel button is to be shown.
totalSteps is the total number of steps in the operation of which this progress dialog shows the progress. For example, if the operation is to examine 50 files, this value would be 50, then before examining the first file, call setProgress(0), and after examining the last file call setProgress(50).
name, modal, and f are sent to the QSemiModal::QSemiModal() constructor. Note that if modal is FALSE (the default), you will need to have an event loop proceeding for any redrawing of the dialog to occur. If it is TRUE, the dialog ensures events are processed when needed.
See also setLabelText(), setLabel(), setCancelButtonText(), setCancelButton() and setTotalSteps().
Destructs the progress dialog.
Returns if the dialog gets hidden by reset().
See also setAutoClose().
Returns if the dialog resets itself when progress() equals totalSteps().
See also setAutoReset().
[slot]Reset the progress dialog. wasCancelled() becomes TRUE until the progress dialog is reset. The progress dialog becomes hidden.
[signal]This signal is emitted when the cancel button is clicked. It is connected to the cancel() slot by default.
See also wasCancelled().
[virtual protected]Reimplemented for internal reasons; the API is not affected.
Reimplemented from QWidget.
[protected slot]Shows the dialog if it is still hidden after the algorithm has been started and the minimumDuration is over.
See also setMinimumDuration().
Returns the labels text.
See also setLabelText.
Returns the currently set minimum duration for the QProgressDialog
See also setMinimumDuration().
Returns the current amount of progress, or -1 if the progress counting has not started.
See also setProgress().
[slot]Reset the progress dialog. The progress dialog becomes hidden if autoClose() is TRUE.
See also setAutoClose() and setAutoReset().
[virtual protected]Reimplemented for internal reasons; the API is not affected.
Reimplemented from QWidget.
If you set b to TRUE, the dialog gets closed (hidden) if reset() is called, else this does not happen.
See also autoClose() and setAutoReset().
If you set b to TRUE, the progress dialog calls reset() if progress() equals totalSteps(), if you set it to FALSE, this does not happen.
See also autoReset() and setAutoClose().
Sets the progress bar widget. The progress dialog resizes to fit. The progress bar becomes owned by the progress dialog and will be deleted when necessary.
Sets the cancellation button. The button becomes owned by the progress dialog and will be deleted when necessary, so do not pass the address of an object on the stack.
See also setCancelButtonText().
[slot]Sets the cancellation button text.
See also setCancelButton().
Sets the label. The progress dialog resizes to fit. The label becomes owned by the progress dialog and will be deleted when necessary, so do not pass the address of an object on the stack.
See also setLabelText().
Examples: progress/progress.cpp
[slot]Sets the label text. The progress dialog resizes to fit.
See also setLabel().
[slot]Sets the minimum duration to ms milliseconds. The dialog will not appear if the anticipated duration of the progressing task is less than the minimum duration.
If ms is 0 the dialog is always shown as soon as any progress is set.
See also minimumDuration().
Examples: progress/progress.cpp
[slot]Sets the current amount of progress made to prog units of the total number of steps. For the progress dialog to work correctly, you must at least call this with the parameter 0 initially, then later with QProgressDialog::totalSteps(), and you may call it any number of times in between.
Warning: If the progress dialog is modal (see QProgressDialog::QProgressDialog()), this function calls QApplication::processEvents(), so take care that this does not cause undesirable re-entrancy to your code. For example, don't use a QProgressDialog inside a paintEvent()!
See also progress().
Examples: progress/progress.cpp
[slot]Sets the total number of steps.
See also totalSteps() and QProgressBar::setTotalSteps().
[virtual protected]Reimplemented for internal reasons; the API is not affected.
Reimplemented from QWidget.
[virtual]Returns a size which fits the contents of the progress dialog. The progress dialog resizes itself as required, so this should not be needed in user code.
Reimplemented from QWidget.
[virtual protected]Reimplemented for internal reasons; the API is not affected.
Reimplemented from QWidget.
Returns the total number of steps.
See also setTotalSteps() and QProgressBar::totalSteps().
Examples: progress/progress.cpp
Returns the TRUE if the dialog was cancelled, otherwise FALSE.
See also setProgress(), cancel() and cancelled().
Examples: progress/progress.cpp
Search the documentation, FAQ, qt-interest archive and more (uses
www.trolltech.com):
This file is part of the Qt toolkit, copyright © 1995-2000 Trolltech, all rights reserved.
| Copyright © 2000 Trolltech | Trademarks | Qt version 2.2.1
|